TY  - JOUR
AU  - Milutinov, Miodrag M.
AU  - Nikolić, Maria Vesna
AU  - Luković, Snežana
AU  - Blaz, Nelu V.
AU  - Labus, Nebojša J.
AU  - Aleksić, Obrad
AU  - Živanov, Ljiljana D
PY  - 2017
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1088
AB  - In this paper, the influence of additional sieving and milling of starting industrial Mn-Zn powders on magnetic properties was investigated. The starting powder was milled for 60 minutes, followed by sieving through 325 and 400 meshes. The starting and milled powders were used to fabricate toroid shaped samples sintered at 1200 degrees C for 2 hours. Structural parameters of the fabricated samples were analysed by X-ray diffraction and scanning electron microscopy. Complex permeability, core loss density, and hysteresis were measured using the modified watt-meter method. The complex permeability and hysteresis loop were modelled with a new model proposed in the paper. The core loss density was modelled with the Steinmetz empirical equation. The experimental results and calculations show the significance of the additional milling and sieving process on magnetic properties of Mn-Zn ferrite in the frequency range 0.1-10MHz. These processes increase the relative permeability about 3 times and decrease the core loss 4 times by milling of the starting powder.
PB  - Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad
T2  - Processing and Application of Ceramics
T1  - Influence of starting powder milling on magnetic properties of Mn-Zn ferrite
EP  - 169
IS  - 2
SP  - 160
VL  - 11
DO  - 10.2298/PAC1702160M
ER  - 

@article{
author = "Milutinov, Miodrag M. and Nikolić, Maria Vesna and Luković, Snežana and Blaz, Nelu V. and Labus, Nebojša J. and Aleksić, Obrad and Živanov, Ljiljana D",
year = "2017",
abstract = "In this paper, the influence of additional sieving and milling of starting industrial Mn-Zn powders on magnetic properties was investigated. The starting powder was milled for 60 minutes, followed by sieving through 325 and 400 meshes. The starting and milled powders were used to fabricate toroid shaped samples sintered at 1200 degrees C for 2 hours. Structural parameters of the fabricated samples were analysed by X-ray diffraction and scanning electron microscopy. Complex permeability, core loss density, and hysteresis were measured using the modified watt-meter method. The complex permeability and hysteresis loop were modelled with a new model proposed in the paper. The core loss density was modelled with the Steinmetz empirical equation. The experimental results and calculations show the significance of the additional milling and sieving process on magnetic properties of Mn-Zn ferrite in the frequency range 0.1-10MHz. These processes increase the relative permeability about 3 times and decrease the core loss 4 times by milling of the starting powder.",
publisher = "Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad",
journal = "Processing and Application of Ceramics",
title = "Influence of starting powder milling on magnetic properties of Mn-Zn ferrite",
pages = "169-160",
number = "2",
volume = "11",
doi = "10.2298/PAC1702160M"
}

Milutinov, M. M., Nikolić, M. V., Luković, S., Blaz, N. V., Labus, N. J., Aleksić, O.,& Živanov, L. D.. (2017). Influence of starting powder milling on magnetic properties of Mn-Zn ferrite. in Processing and Application of Ceramics
Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad., 11(2), 160-169.
https://doi.org/10.2298/PAC1702160M

Milutinov MM, Nikolić MV, Luković S, Blaz NV, Labus NJ, Aleksić O, Živanov LD. Influence of starting powder milling on magnetic properties of Mn-Zn ferrite. in Processing and Application of Ceramics. 2017;11(2):160-169.
doi:10.2298/PAC1702160M .

Milutinov, Miodrag M., Nikolić, Maria Vesna, Luković, Snežana, Blaz, Nelu V., Labus, Nebojša J., Aleksić, Obrad, Živanov, Ljiljana D, "Influence of starting powder milling on magnetic properties of Mn-Zn ferrite" in Processing and Application of Ceramics, 11, no. 2 (2017):160-169,
https://doi.org/10.2298/PAC1702160M . .