Ministry for Science and Technology of SerbiaMinistry of Education, Science & Technological Development, Serbia

Link to this page

Ministry for Science and Technology of SerbiaMinistry of Education, Science & Technological Development, Serbia

Authors

Publications

Grain growth during sintering of batio3 with lif

Pavlović, Vladimir B; Stojanović, Biljana D; Živković, Ljiljana; Branković, Goran; Ristic, Momcilo M.

(Taylor & Francis Ltd, Abingdon, 1996)

TY  - JOUR
AU  - Pavlović, Vladimir B
AU  - Stojanović, Biljana D
AU  - Živković, Ljiljana
AU  - Branković, Goran
AU  - Ristic, Momcilo M.
PY  - 1996
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/35
AB  - The sintering behavior of BaTiO3 with LiF showed that it was possible to sinter barium titanate at temperatures below 1000 degrees C. Different combinations of the sintering powders were prepared by adding 1 to 5 w% LiF and sintering at the temperature of 950 degrees C for 20 hours. The grain growth of LiF fluxed BaTiO3 was studied, and electron microscopy was used to investigate and characterize the microstructure of the samples. The dielectric constant and dielectric losses were determined. It was shown that the composition of the liquid phase formed during this process had a prominent influence on the grain growth and on the formation of BaTiO3 with better dielectric properties.
PB  - Taylor & Francis Ltd, Abingdon
T2  - Ferroelectrics
T1  - Grain growth during sintering of batio3 with lif
EP  - 168
SP  - 165
VL  - 186
DO  - 10.1080/00150199608218057
ER  - 
@article{
author = "Pavlović, Vladimir B and Stojanović, Biljana D and Živković, Ljiljana and Branković, Goran and Ristic, Momcilo M.",
year = "1996",
abstract = "The sintering behavior of BaTiO3 with LiF showed that it was possible to sinter barium titanate at temperatures below 1000 degrees C. Different combinations of the sintering powders were prepared by adding 1 to 5 w% LiF and sintering at the temperature of 950 degrees C for 20 hours. The grain growth of LiF fluxed BaTiO3 was studied, and electron microscopy was used to investigate and characterize the microstructure of the samples. The dielectric constant and dielectric losses were determined. It was shown that the composition of the liquid phase formed during this process had a prominent influence on the grain growth and on the formation of BaTiO3 with better dielectric properties.",
publisher = "Taylor & Francis Ltd, Abingdon",
journal = "Ferroelectrics",
title = "Grain growth during sintering of batio3 with lif",
pages = "168-165",
volume = "186",
doi = "10.1080/00150199608218057"
}
Pavlović, V. B., Stojanović, B. D., Živković, L., Branković, G.,& Ristic, M. M.. (1996). Grain growth during sintering of batio3 with lif. in Ferroelectrics
Taylor & Francis Ltd, Abingdon., 186, 165-168.
https://doi.org/10.1080/00150199608218057
Pavlović VB, Stojanović BD, Živković L, Branković G, Ristic MM. Grain growth during sintering of batio3 with lif. in Ferroelectrics. 1996;186:165-168.
doi:10.1080/00150199608218057 .
Pavlović, Vladimir B, Stojanović, Biljana D, Živković, Ljiljana, Branković, Goran, Ristic, Momcilo M., "Grain growth during sintering of batio3 with lif" in Ferroelectrics, 186 (1996):165-168,
https://doi.org/10.1080/00150199608218057 . .
6
7
6