TY  - JOUR
AU  - Počuča-Nešić, Milica
AU  - Marinković Stanojević, Zorica
AU  - Radović, Miladin
AU  - Benitez, Rogelio
AU  - Jagodic, Marko
AU  - Branković, Goran
AU  - Branković, Zorica
PY  - 2021
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1420
AB  - Intergranular and intragranular cracks that usually form during sintering of yttrium manganite (YMnO3) ceramic samples hinder the densification process of this ceramic and deteriorate its magnetic and ferroelectric properties. To overcome this problem, mechanochemically synthesized YMnO3 powder was sintered using two different processes: Conventional Sintering (CS) and Pulsed Electric Current Sintering (PECS). All samples were characterized by XRD, SEM and FESEM and their magnetic and ferroelectric properties were investigated. Apart from their phase composition, conventionally sintered ceramic samples showed cracks throughout their whole volume, reaching a maximum relative density of 85 %. However, it was found that PECS process could significantly reduce the presence of cracks within samples whose relative density reached 99.8 %.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Processing and Properties of Ceramic Yttrium Manganite Sintered by Different Methods
EP  - 496
IS  - 4
SP  - 485
VL  - 53
DO  - 10.2298/SOS2104485P
ER  - 

@article{
author = "Počuča-Nešić, Milica and Marinković Stanojević, Zorica and Radović, Miladin and Benitez, Rogelio and Jagodic, Marko and Branković, Goran and Branković, Zorica",
year = "2021",
abstract = "Intergranular and intragranular cracks that usually form during sintering of yttrium manganite (YMnO3) ceramic samples hinder the densification process of this ceramic and deteriorate its magnetic and ferroelectric properties. To overcome this problem, mechanochemically synthesized YMnO3 powder was sintered using two different processes: Conventional Sintering (CS) and Pulsed Electric Current Sintering (PECS). All samples were characterized by XRD, SEM and FESEM and their magnetic and ferroelectric properties were investigated. Apart from their phase composition, conventionally sintered ceramic samples showed cracks throughout their whole volume, reaching a maximum relative density of 85 %. However, it was found that PECS process could significantly reduce the presence of cracks within samples whose relative density reached 99.8 %.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Processing and Properties of Ceramic Yttrium Manganite Sintered by Different Methods",
pages = "496-485",
number = "4",
volume = "53",
doi = "10.2298/SOS2104485P"
}

Počuča-Nešić, M., Marinković Stanojević, Z., Radović, M., Benitez, R., Jagodic, M., Branković, G.,& Branković, Z.. (2021). Processing and Properties of Ceramic Yttrium Manganite Sintered by Different Methods. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 53(4), 485-496.
https://doi.org/10.2298/SOS2104485P

Počuča-Nešić M, Marinković Stanojević Z, Radović M, Benitez R, Jagodic M, Branković G, Branković Z. Processing and Properties of Ceramic Yttrium Manganite Sintered by Different Methods. in Science of Sintering. 2021;53(4):485-496.
doi:10.2298/SOS2104485P .

Počuča-Nešić, Milica, Marinković Stanojević, Zorica, Radović, Miladin, Benitez, Rogelio, Jagodic, Marko, Branković, Goran, Branković, Zorica, "Processing and Properties of Ceramic Yttrium Manganite Sintered by Different Methods" in Science of Sintering, 53, no. 4 (2021):485-496,
https://doi.org/10.2298/SOS2104485P . .