Grigalaitis, Robertas

Link to this page

Authority KeyName Variants
980390f8-225f-4020-8926-e4ca514629b9
  • Grigalaitis, Robertas (1)
Projects
No records found.

Author's Bibliography

Synthesis and Characterization of x BaTiOs - (1-x) NiFezO+ Composites

Džunuzović, Adis; Ilić, Nikola; Bobić, Jelena; Vijatović Petrović, Mirjana; Grigalaitis, Robertas; Stojanović, Biljana

(cost MP0904: Single- and multiphase ferroics and multiferroics with restricted geometries (SIMUFER) Closing Conference and Final Management Committee meeting, CNR-IENI: lnstitute for Energetics and lnterphases, Genoa, ltaly 30th January - 1"t February, 2014, 2014)

TY  - CONF
AU  - Džunuzović, Adis
AU  - Ilić, Nikola
AU  - Bobić, Jelena
AU  - Vijatović Petrović, Mirjana
AU  - Grigalaitis, Robertas
AU  - Stojanović, Biljana
PY  - 2014
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/2665
AB  - Multiferroic composites with the general formula x BaTiO3-(l-x) NiFezO+
(x = 0.5, 0.7, 0,8) were prepared by mixing chemically obtained powders of nickel ferrite and barium
titanate. NiFezO+ powder was prepared by auto combustion method stafting from nickel and iron
nitrates. After - 4 h solvent was removed and during the process of self-ignition fine powder was
obtained. Thermal treatment was peformed at 1000 oC for t h and the nickel ferrite powder (NF)
was formed. Barium titanate (BT) powder was prepared by a polymeric precursor method. Barium and
titanium citrate solutions were peformed using barium acetate and titanium-isopropoxide. The
.obtained citrates were mixed and heated at 140 oC for - 5 h. Thermal treatments was further
performed at 250 ocl1 h and 300 ocl4h, and after that in the temperature range 350-800 oC for 4h
barium titanate nanopowder was formed [1].Composites (BT-NF) with the general formula x BaTiO3 -
(1-x) NiFe2O4 were prepared by mixing obtained powders of nickel ferrite and barium titanate in
planetary ball mill for 24h. Powders were pressed and sintered at 1170 oC for 4 h. X-ray
measurements confirmed the presence of NF and BT phases. The microstructure of the ceramics
showed formation of polygonal grains, (Fig.1, right). Magnetic measurements of composite materials
were carried (Fig.l, left). Saturation magnetization moment of composite materials decrease with
barium titanate amount and the fields at which saturation occur increase with BT content. The
coercivity Hc (Oe) increases with barium titanate concentration in obtained multiferroic material.
PB  - cost MP0904: Single- and multiphase ferroics and multiferroics with restricted geometries (SIMUFER) Closing Conference and Final Management Committee meeting, CNR-IENI: lnstitute for Energetics and lnterphases, Genoa, ltaly 30th January - 1"t February, 2014
C3  - cost MP0904: Single- and multiphase ferroics and multiferroics with restricted geometries (SIMUFER) Closing Conference and Final Management Committee meeting, CNR-IENI: lnstitute for Energetics and lnterphases, Genoa, ltaly 30th January - 1"t February, 2014
T1  - Synthesis and Characterization of x BaTiOs - (1-x) NiFezO+ Composites
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_2665
ER  - 
@conference{
author = "Džunuzović, Adis and Ilić, Nikola and Bobić, Jelena and Vijatović Petrović, Mirjana and Grigalaitis, Robertas and Stojanović, Biljana",
year = "2014",
abstract = "Multiferroic composites with the general formula x BaTiO3-(l-x) NiFezO+
(x = 0.5, 0.7, 0,8) were prepared by mixing chemically obtained powders of nickel ferrite and barium
titanate. NiFezO+ powder was prepared by auto combustion method stafting from nickel and iron
nitrates. After - 4 h solvent was removed and during the process of self-ignition fine powder was
obtained. Thermal treatment was peformed at 1000 oC for t h and the nickel ferrite powder (NF)
was formed. Barium titanate (BT) powder was prepared by a polymeric precursor method. Barium and
titanium citrate solutions were peformed using barium acetate and titanium-isopropoxide. The
.obtained citrates were mixed and heated at 140 oC for - 5 h. Thermal treatments was further
performed at 250 ocl1 h and 300 ocl4h, and after that in the temperature range 350-800 oC for 4h
barium titanate nanopowder was formed [1].Composites (BT-NF) with the general formula x BaTiO3 -
(1-x) NiFe2O4 were prepared by mixing obtained powders of nickel ferrite and barium titanate in
planetary ball mill for 24h. Powders were pressed and sintered at 1170 oC for 4 h. X-ray
measurements confirmed the presence of NF and BT phases. The microstructure of the ceramics
showed formation of polygonal grains, (Fig.1, right). Magnetic measurements of composite materials
were carried (Fig.l, left). Saturation magnetization moment of composite materials decrease with
barium titanate amount and the fields at which saturation occur increase with BT content. The
coercivity Hc (Oe) increases with barium titanate concentration in obtained multiferroic material.",
publisher = "cost MP0904: Single- and multiphase ferroics and multiferroics with restricted geometries (SIMUFER) Closing Conference and Final Management Committee meeting, CNR-IENI: lnstitute for Energetics and lnterphases, Genoa, ltaly 30th January - 1"t February, 2014",
journal = "cost MP0904: Single- and multiphase ferroics and multiferroics with restricted geometries (SIMUFER) Closing Conference and Final Management Committee meeting, CNR-IENI: lnstitute for Energetics and lnterphases, Genoa, ltaly 30th January - 1"t February, 2014",
title = "Synthesis and Characterization of x BaTiOs - (1-x) NiFezO+ Composites",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_2665"
}
Džunuzović, A., Ilić, N., Bobić, J., Vijatović Petrović, M., Grigalaitis, R.,& Stojanović, B.. (2014). Synthesis and Characterization of x BaTiOs - (1-x) NiFezO+ Composites. in cost MP0904: Single- and multiphase ferroics and multiferroics with restricted geometries (SIMUFER) Closing Conference and Final Management Committee meeting, CNR-IENI: lnstitute for Energetics and lnterphases, Genoa, ltaly 30th January - 1"t February, 2014
cost MP0904: Single- and multiphase ferroics and multiferroics with restricted geometries (SIMUFER) Closing Conference and Final Management Committee meeting, CNR-IENI: lnstitute for Energetics and lnterphases, Genoa, ltaly 30th January - 1"t February, 2014..
https://hdl.handle.net/21.15107/rcub_rimsi_2665
Džunuzović A, Ilić N, Bobić J, Vijatović Petrović M, Grigalaitis R, Stojanović B. Synthesis and Characterization of x BaTiOs - (1-x) NiFezO+ Composites. in cost MP0904: Single- and multiphase ferroics and multiferroics with restricted geometries (SIMUFER) Closing Conference and Final Management Committee meeting, CNR-IENI: lnstitute for Energetics and lnterphases, Genoa, ltaly 30th January - 1"t February, 2014. 2014;.
https://hdl.handle.net/21.15107/rcub_rimsi_2665 .
Džunuzović, Adis, Ilić, Nikola, Bobić, Jelena, Vijatović Petrović, Mirjana, Grigalaitis, Robertas, Stojanović, Biljana, "Synthesis and Characterization of x BaTiOs - (1-x) NiFezO+ Composites" in cost MP0904: Single- and multiphase ferroics and multiferroics with restricted geometries (SIMUFER) Closing Conference and Final Management Committee meeting, CNR-IENI: lnstitute for Energetics and lnterphases, Genoa, ltaly 30th January - 1"t February, 2014 (2014),
https://hdl.handle.net/21.15107/rcub_rimsi_2665 .