Bowen, P

Link to this page

Authority KeyName Variants
orcid::0000-0003-3031-0838
  • Bowen, P (1)
Projects

Author's Bibliography

Properties of lanthanum doped BaTiO3 produced from nanopowders

Vijatović Petrović, Mirjana; Stojanović, Biljana D; Bobić, Jelena; Ramoska, T; Bowen, P

(Elsevier Sci Ltd, Oxford, 2010)

TY  - JOUR
AU  - Vijatović Petrović, Mirjana
AU  - Stojanović, Biljana D
AU  - Bobić, Jelena
AU  - Ramoska, T
AU  - Bowen, P
PY  - 2010
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/428
AB  - Pure and barium titanate (BT) powders doped with different lanthanum concentration were prepared by the polymeric precursor method (Pechini process) which was carried out as a three-stage process from organometallic complexes. Sintering of pressed powders was performed at 1300 degrees C for 2, 4 and 8 h. XRD analysis showed cubic BT powders with crystallite sizes between 20 and 25 nm and tetragonal crystal structure of BT ceramics. The influence of sintering time on grain growth was fairly obvious. It was found that lanthanum doping has significant effect on powders particle size and ceramics grain size. The influence of lanthanum concentration on grain size inhibition, improving the dielectric properties of BT ceramics was detected. The relation between sintering time, grain size, structure and electrical properties of the BT ceramics was analyzed.
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Properties of lanthanum doped BaTiO3 produced from nanopowders
EP  - 1824
IS  - 6
SP  - 1817
VL  - 36
DO  - 10.1016/j.ceramint.2010.03.010
ER  - 
@article{
author = "Vijatović Petrović, Mirjana and Stojanović, Biljana D and Bobić, Jelena and Ramoska, T and Bowen, P",
year = "2010",
abstract = "Pure and barium titanate (BT) powders doped with different lanthanum concentration were prepared by the polymeric precursor method (Pechini process) which was carried out as a three-stage process from organometallic complexes. Sintering of pressed powders was performed at 1300 degrees C for 2, 4 and 8 h. XRD analysis showed cubic BT powders with crystallite sizes between 20 and 25 nm and tetragonal crystal structure of BT ceramics. The influence of sintering time on grain growth was fairly obvious. It was found that lanthanum doping has significant effect on powders particle size and ceramics grain size. The influence of lanthanum concentration on grain size inhibition, improving the dielectric properties of BT ceramics was detected. The relation between sintering time, grain size, structure and electrical properties of the BT ceramics was analyzed.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Properties of lanthanum doped BaTiO3 produced from nanopowders",
pages = "1824-1817",
number = "6",
volume = "36",
doi = "10.1016/j.ceramint.2010.03.010"
}
Vijatović Petrović, M., Stojanović, B. D., Bobić, J., Ramoska, T.,& Bowen, P.. (2010). Properties of lanthanum doped BaTiO3 produced from nanopowders. in Ceramics International
Elsevier Sci Ltd, Oxford., 36(6), 1817-1824.
https://doi.org/10.1016/j.ceramint.2010.03.010
Vijatović Petrović M, Stojanović BD, Bobić J, Ramoska T, Bowen P. Properties of lanthanum doped BaTiO3 produced from nanopowders. in Ceramics International. 2010;36(6):1817-1824.
doi:10.1016/j.ceramint.2010.03.010 .
Vijatović Petrović, Mirjana, Stojanović, Biljana D, Bobić, Jelena, Ramoska, T, Bowen, P, "Properties of lanthanum doped BaTiO3 produced from nanopowders" in Ceramics International, 36, no. 6 (2010):1817-1824,
https://doi.org/10.1016/j.ceramint.2010.03.010 . .
3
81
54
82