TY  - CONF
AU  - Menicanin, Aleksandar
AU  - Živanov, Ljiljana D
AU  - Damnjanović, M.S.
AU  - Blaz, Nelu V.
AU  - Marić, Andrea M
PY  - 2016
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/968
AB  - In this paper, influence of different substrates' thickness on coplanar waveguide (CPW) inductors for high frequency applications is presented. The designed CPW inductors are two-port meanders with one turn and outer dimension 1.8 mm x 2.0 mm. CPW inductors were made in inkjet printing technology with nanoparticle ink which contain 20 wt% of silver. CPW inductors are fabricated on substrates with 25, 50, 75 and 125 m thicknesses. The measured response characteristics are in excellent agreement with the predicted simulation response. The best values of inductance and Q-factor were obtained with 125 mu m thickness of substrate (L=2.269 nH and Q congruent to 5).
PB  - IEEE Computer Society
C3  - Mediterranean Microwave Symposium
T1  - Influence of different substrates' thickness on the performance of inkjet printed CPW inductors
VL  - 0
DO  - 10.1109/MMS.2016.7803874
ER  - 

@conference{
author = "Menicanin, Aleksandar and Živanov, Ljiljana D and Damnjanović, M.S. and Blaz, Nelu V. and Marić, Andrea M",
year = "2016",
abstract = "In this paper, influence of different substrates' thickness on coplanar waveguide (CPW) inductors for high frequency applications is presented. The designed CPW inductors are two-port meanders with one turn and outer dimension 1.8 mm x 2.0 mm. CPW inductors were made in inkjet printing technology with nanoparticle ink which contain 20 wt% of silver. CPW inductors are fabricated on substrates with 25, 50, 75 and 125 m thicknesses. The measured response characteristics are in excellent agreement with the predicted simulation response. The best values of inductance and Q-factor were obtained with 125 mu m thickness of substrate (L=2.269 nH and Q congruent to 5).",
publisher = "IEEE Computer Society",
journal = "Mediterranean Microwave Symposium",
title = "Influence of different substrates' thickness on the performance of inkjet printed CPW inductors",
volume = "0",
doi = "10.1109/MMS.2016.7803874"
}

Menicanin, A., Živanov, L. D., Damnjanović, M.S., Blaz, N. V.,& Marić, A. M.. (2016). Influence of different substrates' thickness on the performance of inkjet printed CPW inductors. in Mediterranean Microwave Symposium
IEEE Computer Society., 0.
https://doi.org/10.1109/MMS.2016.7803874

Menicanin A, Živanov LD, Damnjanović M, Blaz NV, Marić AM. Influence of different substrates' thickness on the performance of inkjet printed CPW inductors. in Mediterranean Microwave Symposium. 2016;0.
doi:10.1109/MMS.2016.7803874 .

Menicanin, Aleksandar, Živanov, Ljiljana D, Damnjanović, M.S., Blaz, Nelu V., Marić, Andrea M, "Influence of different substrates' thickness on the performance of inkjet printed CPW inductors" in Mediterranean Microwave Symposium, 0 (2016),
https://doi.org/10.1109/MMS.2016.7803874 . .

TY  - JOUR
AU  - Menicanin, Aleksandar
AU  - Ivanisević, Nikola P.
AU  - Živanov, Ljiljana D
AU  - Damnjanović, Mirjana S.
AU  - Marić, Andrea M
AU  - Randjelović, Danijela V
PY  - 2014
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/802
AB  - In this paper, we present the modeling, fabrication, measurement techniques, and characterization results of multilayer miniature coplanar waveguide (CPW) meander-type inductors for high-frequency applications. Detailed procedure of the fabrication process based on using ink-jet printing technology is given. Silver nanoparticle ink that contains 20 wt% of silver was printed on a flexible polyimide foil 50 mu m thick in one, two, and three layers. It is shown that multilayer CPW inductors have improved performance. Almost two times better Q-factor value was achieved. This is an encouraging result for multilayer printing in ink-jet technology.
PB  - IEEE-Inst Electrical Electronics Engineers Inc, Piscataway
T2  - IEEE Transactions on Magnetics
T1  - Improved Performance of Multilayer CPW Inductors on Flexible Substrate
IS  - 11
VL  - 50
DO  - 10.1109/TMAG.2014.2329720
ER  - 

@article{
author = "Menicanin, Aleksandar and Ivanisević, Nikola P. and Živanov, Ljiljana D and Damnjanović, Mirjana S. and Marić, Andrea M and Randjelović, Danijela V",
year = "2014",
abstract = "In this paper, we present the modeling, fabrication, measurement techniques, and characterization results of multilayer miniature coplanar waveguide (CPW) meander-type inductors for high-frequency applications. Detailed procedure of the fabrication process based on using ink-jet printing technology is given. Silver nanoparticle ink that contains 20 wt% of silver was printed on a flexible polyimide foil 50 mu m thick in one, two, and three layers. It is shown that multilayer CPW inductors have improved performance. Almost two times better Q-factor value was achieved. This is an encouraging result for multilayer printing in ink-jet technology.",
publisher = "IEEE-Inst Electrical Electronics Engineers Inc, Piscataway",
journal = "IEEE Transactions on Magnetics",
title = "Improved Performance of Multilayer CPW Inductors on Flexible Substrate",
number = "11",
volume = "50",
doi = "10.1109/TMAG.2014.2329720"
}

Menicanin, A., Ivanisević, N. P., Živanov, L. D., Damnjanović, M. S., Marić, A. M.,& Randjelović, D. V.. (2014). Improved Performance of Multilayer CPW Inductors on Flexible Substrate. in IEEE Transactions on Magnetics
IEEE-Inst Electrical Electronics Engineers Inc, Piscataway., 50(11).
https://doi.org/10.1109/TMAG.2014.2329720

Menicanin A, Ivanisević NP, Živanov LD, Damnjanović MS, Marić AM, Randjelović DV. Improved Performance of Multilayer CPW Inductors on Flexible Substrate. in IEEE Transactions on Magnetics. 2014;50(11).
doi:10.1109/TMAG.2014.2329720 .

Menicanin, Aleksandar, Ivanisević, Nikola P., Živanov, Ljiljana D, Damnjanović, Mirjana S., Marić, Andrea M, Randjelović, Danijela V, "Improved Performance of Multilayer CPW Inductors on Flexible Substrate" in IEEE Transactions on Magnetics, 50, no. 11 (2014),
https://doi.org/10.1109/TMAG.2014.2329720 . .

TY  - JOUR
AU  - Menicanin, Aleksandar
AU  - Živanov, Ljiljana D
AU  - Damnjanović, Mirjana S
AU  - Marić, Andrea M
PY  - 2013
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/661
AB  - This paper describes the design and fabrication of low-cost coplanar waveguide (CPW) miniature meander inductors. Inductors are fabricated on a flexible plastic polyimide foil in ink-jet printed technology with silver nanoparticle ink in a single layer. For the first time, the detailed characterization and simulation of CPW inductors in this technology is reported. The inductors are developed with impressive measured self-resonance frequency up to 18.6 GHz. The 2.107-nH inductor measures only 1 mm x 1.7 mm x 0.075 mm and demonstrates a high level of miniaturization in ink-jet printing technology. The measured response characteristics are in excellent agreement with the predicted simulation response.
PB  - IEEE-Inst Electrical Electronics Engineers Inc, Piscataway
T2  - IEEE Transactions on Electron Devices
T1  - Low-Cost CPW Meander Inductors Utilizing Ink-Jet Printing on Flexible Substrate for High-Frequency Applications
EP  - 832
IS  - 2
SP  - 827
VL  - 60
DO  - 10.1109/TED.2012.2234461
ER  - 

@article{
author = "Menicanin, Aleksandar and Živanov, Ljiljana D and Damnjanović, Mirjana S and Marić, Andrea M",
year = "2013",
abstract = "This paper describes the design and fabrication of low-cost coplanar waveguide (CPW) miniature meander inductors. Inductors are fabricated on a flexible plastic polyimide foil in ink-jet printed technology with silver nanoparticle ink in a single layer. For the first time, the detailed characterization and simulation of CPW inductors in this technology is reported. The inductors are developed with impressive measured self-resonance frequency up to 18.6 GHz. The 2.107-nH inductor measures only 1 mm x 1.7 mm x 0.075 mm and demonstrates a high level of miniaturization in ink-jet printing technology. The measured response characteristics are in excellent agreement with the predicted simulation response.",
publisher = "IEEE-Inst Electrical Electronics Engineers Inc, Piscataway",
journal = "IEEE Transactions on Electron Devices",
title = "Low-Cost CPW Meander Inductors Utilizing Ink-Jet Printing on Flexible Substrate for High-Frequency Applications",
pages = "832-827",
number = "2",
volume = "60",
doi = "10.1109/TED.2012.2234461"
}

Menicanin, A., Živanov, L. D., Damnjanović, M. S.,& Marić, A. M.. (2013). Low-Cost CPW Meander Inductors Utilizing Ink-Jet Printing on Flexible Substrate for High-Frequency Applications. in IEEE Transactions on Electron Devices
IEEE-Inst Electrical Electronics Engineers Inc, Piscataway., 60(2), 827-832.
https://doi.org/10.1109/TED.2012.2234461

Menicanin A, Živanov LD, Damnjanović MS, Marić AM. Low-Cost CPW Meander Inductors Utilizing Ink-Jet Printing on Flexible Substrate for High-Frequency Applications. in IEEE Transactions on Electron Devices. 2013;60(2):827-832.
doi:10.1109/TED.2012.2234461 .

Menicanin, Aleksandar, Živanov, Ljiljana D, Damnjanović, Mirjana S, Marić, Andrea M, "Low-Cost CPW Meander Inductors Utilizing Ink-Jet Printing on Flexible Substrate for High-Frequency Applications" in IEEE Transactions on Electron Devices, 60, no. 2 (2013):827-832,
https://doi.org/10.1109/TED.2012.2234461 . .

TY  - CONF
AU  - Živanov, Ljiljana D
AU  - Marić, Andrea
AU  - Menicanin, Aleksandar
PY  - 2012
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/3146
AB  - U ovom radu je predstavljen koplanarni induktor u fleksibilnoj tehnologiji dobijen postupkom ink-jet štampanja. Prikazani su projektovanje, simulacija, proizvodnja, merenja i karakterizacija ovih struktura. Ova tehnologija predstavlja rešenje za veoma jeftinu masovnu proizvodnju. Koplanarni induktori, koji su razvijeni za fleksibilnu štampanu elektroniku, su dobijeni na polimernoj podlozi sa provodnim slojem od nanočestičnog srebra.
AB  - In this paper we present an ink-jet printed coplanar waveguide (CPW) inductors in flexible technology. We show design, simulation, fabrication, characterization and measurement technique of such devices. This is solution for ultra low-cost mass production. CPW inductors were developed as a technology for much simpler and faster fabrication on/in plastic foil. Structures are printed on Kapton substrate with polyamide silver nanoparticle ink.
C3  - ETRAN 2012, Društvo za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, Srbija
T1  - Koplanar induktor u fleksibilnoj tehnologiji sa provodnim slojem od nanočestičnog srebra
T1  - INK-JET PRINTED CPW INDUCTOR IN FLEXIBLE TECHNOLOGY WITH CONDUCTIVE LAYER CONTAINING SILVER NANOPARTICLES
EP  - MO1.5-4
SP  - MO1.5-1
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_3146
ER  - 

@conference{
author = "Živanov, Ljiljana D and Marić, Andrea and Menicanin, Aleksandar",
year = "2012",
abstract = "U ovom radu je predstavljen koplanarni induktor u fleksibilnoj tehnologiji dobijen postupkom ink-jet štampanja. Prikazani su projektovanje, simulacija, proizvodnja, merenja i karakterizacija ovih struktura. Ova tehnologija predstavlja rešenje za veoma jeftinu masovnu proizvodnju. Koplanarni induktori, koji su razvijeni za fleksibilnu štampanu elektroniku, su dobijeni na polimernoj podlozi sa provodnim slojem od nanočestičnog srebra., In this paper we present an ink-jet printed coplanar waveguide (CPW) inductors in flexible technology. We show design, simulation, fabrication, characterization and measurement technique of such devices. This is solution for ultra low-cost mass production. CPW inductors were developed as a technology for much simpler and faster fabrication on/in plastic foil. Structures are printed on Kapton substrate with polyamide silver nanoparticle ink.",
journal = "ETRAN 2012, Društvo za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, Srbija",
title = "Koplanar induktor u fleksibilnoj tehnologiji sa provodnim slojem od nanočestičnog srebra, INK-JET PRINTED CPW INDUCTOR IN FLEXIBLE TECHNOLOGY WITH CONDUCTIVE LAYER CONTAINING SILVER NANOPARTICLES",
pages = "MO1.5-4-MO1.5-1",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_3146"
}

Živanov, L. D., Marić, A.,& Menicanin, A.. (2012). Koplanar induktor u fleksibilnoj tehnologiji sa provodnim slojem od nanočestičnog srebra. in ETRAN 2012, Društvo za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, Srbija, MO1.5-1-MO1.5-4.
https://hdl.handle.net/21.15107/rcub_rimsi_3146

Živanov LD, Marić A, Menicanin A. Koplanar induktor u fleksibilnoj tehnologiji sa provodnim slojem od nanočestičnog srebra. in ETRAN 2012, Društvo za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, Srbija. 2012;:MO1.5-1-MO1.5-4.
https://hdl.handle.net/21.15107/rcub_rimsi_3146 .

Živanov, Ljiljana D, Marić, Andrea, Menicanin, Aleksandar, "Koplanar induktor u fleksibilnoj tehnologiji sa provodnim slojem od nanočestičnog srebra" in ETRAN 2012, Društvo za elektroniku, telekomunikacije, računarstvo, automatiku i nuklearnu tehniku, Srbija (2012):MO1.5-1-MO1.5-4,
https://hdl.handle.net/21.15107/rcub_rimsi_3146 .

TY  - CONF
AU  - Menicanin, Aleksandar
AU  - Živanov, Ljiljana D
AU  - Damnjanović, M.
AU  - Marić, Andrea M
AU  - Samardžić, Nataša M
PY  - 2012
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/589
AB  - In this paper we present an ink-jet printed coplanar waveguide (CPW) inductors in flexible technology. We show design, fabrication, characterization and measurement technique of such devices. This is solution for ultra low-cost mass production. CPW inductors were developed as a technology for much simpler and faster fabrication on/in plastic foil. Structures are printed on Kapton substrate with polyamide silver nanoparticle ink.
C3  - MIPRO 2012 - 35th International Convention on Information and Communication Technology, Electronics
T1  - Ink-jet printed CPW inductors in flexible technology
EP  - 236
SP  - 233
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_589
ER  - 

@conference{
author = "Menicanin, Aleksandar and Živanov, Ljiljana D and Damnjanović, M. and Marić, Andrea M and Samardžić, Nataša M",
year = "2012",
abstract = "In this paper we present an ink-jet printed coplanar waveguide (CPW) inductors in flexible technology. We show design, fabrication, characterization and measurement technique of such devices. This is solution for ultra low-cost mass production. CPW inductors were developed as a technology for much simpler and faster fabrication on/in plastic foil. Structures are printed on Kapton substrate with polyamide silver nanoparticle ink.",
journal = "MIPRO 2012 - 35th International Convention on Information and Communication Technology, Electronics",
title = "Ink-jet printed CPW inductors in flexible technology",
pages = "236-233",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_589"
}

Menicanin, A., Živanov, L. D., Damnjanović, M., Marić, A. M.,& Samardžić, N. M.. (2012). Ink-jet printed CPW inductors in flexible technology. in MIPRO 2012 - 35th International Convention on Information and Communication Technology, Electronics, 233-236.
https://hdl.handle.net/21.15107/rcub_rimsi_589

Menicanin A, Živanov LD, Damnjanović M, Marić AM, Samardžić NM. Ink-jet printed CPW inductors in flexible technology. in MIPRO 2012 - 35th International Convention on Information and Communication Technology, Electronics. 2012;:233-236.
https://hdl.handle.net/21.15107/rcub_rimsi_589 .

Menicanin, Aleksandar, Živanov, Ljiljana D, Damnjanović, M., Marić, Andrea M, Samardžić, Nataša M, "Ink-jet printed CPW inductors in flexible technology" in MIPRO 2012 - 35th International Convention on Information and Communication Technology, Electronics (2012):233-236,
https://hdl.handle.net/21.15107/rcub_rimsi_589 .

TY  - JOUR
AU  - Damnjanović, Mirjana S
AU  - Živanov, Ljiljana D
AU  - Djuric, Snežana M
AU  - Marić, Andrea M
AU  - Menicanin, Aleksandar
AU  - Radosavljević, Goran
AU  - Blaz, Nelu V.
PY  - 2012
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/505
AB  - Purpose - Significant achievements in ferrite material processing enable developments of many ferrite devices with a wide range of power levels and working frequencies, which make demands for new characterization and modelling methods for ferrite materials and components. The purpose of this paper is to introduce a modelling and measurement procedure, which can be used for the characterization of two-port ferrite components in high frequency range. Design/methodology/approach - This paper presents a commercially available ferrite component (transformer) modelling and determination of its electrical parameters using in-house developed software. The components are measured and characterized using a vector network analyzer E5071B and adaptation test fixture on PCB board. The parameters of electrical equivalent circuit of the ferrite transformer parameters are compared with values extracted out of measured scattering parameters. Findings - A good agreement between modelled and extracted electrical parameters of the ferrite transformer is found. The modelled inductance curves have the same dependence versus frequency as extracted ones. That confirms the model validity in the wide frequency range. Originality/value - In-house developed software based on proposed model provides inclusion of the ferrite material dispersive characteristics, which dominantly determines high-frequency behaviour of two-port ferrite components. Developed software enables fast and accurate calculation of the ferrite transformer electrical parameters and its redesign in order to achieve the best performance for required application.
PB  - Emerald Group Publishing Ltd, Bingley
T2  - Microelectronics International
T1  - Characterization and modelling of miniature ferrite transformer for high frequency applications
EP  - 89
IS  - 2
SP  - 83
VL  - 29
DO  - 10.1108/13565361211237671
ER  - 

@article{
author = "Damnjanović, Mirjana S and Živanov, Ljiljana D and Djuric, Snežana M and Marić, Andrea M and Menicanin, Aleksandar and Radosavljević, Goran and Blaz, Nelu V.",
year = "2012",
abstract = "Purpose - Significant achievements in ferrite material processing enable developments of many ferrite devices with a wide range of power levels and working frequencies, which make demands for new characterization and modelling methods for ferrite materials and components. The purpose of this paper is to introduce a modelling and measurement procedure, which can be used for the characterization of two-port ferrite components in high frequency range. Design/methodology/approach - This paper presents a commercially available ferrite component (transformer) modelling and determination of its electrical parameters using in-house developed software. The components are measured and characterized using a vector network analyzer E5071B and adaptation test fixture on PCB board. The parameters of electrical equivalent circuit of the ferrite transformer parameters are compared with values extracted out of measured scattering parameters. Findings - A good agreement between modelled and extracted electrical parameters of the ferrite transformer is found. The modelled inductance curves have the same dependence versus frequency as extracted ones. That confirms the model validity in the wide frequency range. Originality/value - In-house developed software based on proposed model provides inclusion of the ferrite material dispersive characteristics, which dominantly determines high-frequency behaviour of two-port ferrite components. Developed software enables fast and accurate calculation of the ferrite transformer electrical parameters and its redesign in order to achieve the best performance for required application.",
publisher = "Emerald Group Publishing Ltd, Bingley",
journal = "Microelectronics International",
title = "Characterization and modelling of miniature ferrite transformer for high frequency applications",
pages = "89-83",
number = "2",
volume = "29",
doi = "10.1108/13565361211237671"
}

Damnjanović, M. S., Živanov, L. D., Djuric, S. M., Marić, A. M., Menicanin, A., Radosavljević, G.,& Blaz, N. V.. (2012). Characterization and modelling of miniature ferrite transformer for high frequency applications. in Microelectronics International
Emerald Group Publishing Ltd, Bingley., 29(2), 83-89.
https://doi.org/10.1108/13565361211237671

Damnjanović MS, Živanov LD, Djuric SM, Marić AM, Menicanin A, Radosavljević G, Blaz NV. Characterization and modelling of miniature ferrite transformer for high frequency applications. in Microelectronics International. 2012;29(2):83-89.
doi:10.1108/13565361211237671 .

Damnjanović, Mirjana S, Živanov, Ljiljana D, Djuric, Snežana M, Marić, Andrea M, Menicanin, Aleksandar, Radosavljević, Goran, Blaz, Nelu V., "Characterization and modelling of miniature ferrite transformer for high frequency applications" in Microelectronics International, 29, no. 2 (2012):83-89,
https://doi.org/10.1108/13565361211237671 . .

TY  - CONF
AU  - Damnjanović, Mirjana S
AU  - Živanov, Ljiljana D
AU  - Radosavljević, Goran
AU  - Marić, Andrea
AU  - Menicanin, Aleksandar
PY  - 2010
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/3147
AB  - A characterization of ferrite transformers based on S-parameters measurement using vector network analyzer and specially developed PCB test fixture is presented. Ferrite transformers are realized with commercially available ferrite component. In addition, in order to verify the measurement procedure, we have tested the same component using impedance analyzer, and compared the results with VNA measurement procedure. It is shown that proposed approach is efficient in predicting and analyzing the transformer performance, even in high frequency range.
PB  - 14th International Power Electronics and Motion Control Conference, EPE-PEMC 2010
C3  - 14th International Power Electronics and Motion Control Conference, EPE-PEMC 2010
T1  - Parameter extraction of ferrite transformers using S-parameters
EP  - T8-36
SP  - T8-31
DO  - 10.1109/EPEPEMC.2010.5606650
ER  - 

@conference{
author = "Damnjanović, Mirjana S and Živanov, Ljiljana D and Radosavljević, Goran and Marić, Andrea and Menicanin, Aleksandar",
year = "2010",
abstract = "A characterization of ferrite transformers based on S-parameters measurement using vector network analyzer and specially developed PCB test fixture is presented. Ferrite transformers are realized with commercially available ferrite component. In addition, in order to verify the measurement procedure, we have tested the same component using impedance analyzer, and compared the results with VNA measurement procedure. It is shown that proposed approach is efficient in predicting and analyzing the transformer performance, even in high frequency range.",
publisher = "14th International Power Electronics and Motion Control Conference, EPE-PEMC 2010",
journal = "14th International Power Electronics and Motion Control Conference, EPE-PEMC 2010",
title = "Parameter extraction of ferrite transformers using S-parameters",
pages = "T8-36-T8-31",
doi = "10.1109/EPEPEMC.2010.5606650"
}

Damnjanović, M. S., Živanov, L. D., Radosavljević, G., Marić, A.,& Menicanin, A.. (2010). Parameter extraction of ferrite transformers using S-parameters. in 14th International Power Electronics and Motion Control Conference, EPE-PEMC 2010
14th International Power Electronics and Motion Control Conference, EPE-PEMC 2010., T8-31-T8-36.
https://doi.org/10.1109/EPEPEMC.2010.5606650

Damnjanović MS, Živanov LD, Radosavljević G, Marić A, Menicanin A. Parameter extraction of ferrite transformers using S-parameters. in 14th International Power Electronics and Motion Control Conference, EPE-PEMC 2010. 2010;:T8-31-T8-36.
doi:10.1109/EPEPEMC.2010.5606650 .

Damnjanović, Mirjana S, Živanov, Ljiljana D, Radosavljević, Goran, Marić, Andrea, Menicanin, Aleksandar, "Parameter extraction of ferrite transformers using S-parameters" in 14th International Power Electronics and Motion Control Conference, EPE-PEMC 2010 (2010):T8-31-T8-36,
https://doi.org/10.1109/EPEPEMC.2010.5606650 . .

TY  - CONF
AU  - Damnjanović, M.S.
AU  - Živanov, Ljiljana D
AU  - Marić, Andrea M
AU  - Radosavljević, Goran
AU  - Menicanin, Aleksandar
AU  - Blaz, Nelu V.
AU  - Djurić, S.M.
PY  - 2010
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/397
AB  - In this paper, characterization of ferrite surface mount bead based on S-parameters measurement, using vector network analyzer E5071B and specially developed PCB test fixture, are presented. The validation of characterization method was performed using commercially available ferrite component, the surface mount 4-way bead. It is shown that proposed approach is efficient in predicting and analyzing the ferrite bead performance, not only in standard frequency range bellow 100 MHz, but also in high frequency range up to 1GHz.
C3  - SIISY 2010 - 8th IEEE International Symposium on Intelligent Systems and Informatics
T1  - Characterization of ferrite surface mount bead using S-parameters
EP  - 360
SP  - 357
DO  - 10.1109/SISY.2010.5647408
ER  - 

@conference{
author = "Damnjanović, M.S. and Živanov, Ljiljana D and Marić, Andrea M and Radosavljević, Goran and Menicanin, Aleksandar and Blaz, Nelu V. and Djurić, S.M.",
year = "2010",
abstract = "In this paper, characterization of ferrite surface mount bead based on S-parameters measurement, using vector network analyzer E5071B and specially developed PCB test fixture, are presented. The validation of characterization method was performed using commercially available ferrite component, the surface mount 4-way bead. It is shown that proposed approach is efficient in predicting and analyzing the ferrite bead performance, not only in standard frequency range bellow 100 MHz, but also in high frequency range up to 1GHz.",
journal = "SIISY 2010 - 8th IEEE International Symposium on Intelligent Systems and Informatics",
title = "Characterization of ferrite surface mount bead using S-parameters",
pages = "360-357",
doi = "10.1109/SISY.2010.5647408"
}

Damnjanović, M.S., Živanov, L. D., Marić, A. M., Radosavljević, G., Menicanin, A., Blaz, N. V.,& Djurić, S.M.. (2010). Characterization of ferrite surface mount bead using S-parameters. in SIISY 2010 - 8th IEEE International Symposium on Intelligent Systems and Informatics, 357-360.
https://doi.org/10.1109/SISY.2010.5647408

Damnjanović M, Živanov LD, Marić AM, Radosavljević G, Menicanin A, Blaz NV, Djurić S. Characterization of ferrite surface mount bead using S-parameters. in SIISY 2010 - 8th IEEE International Symposium on Intelligent Systems and Informatics. 2010;:357-360.
doi:10.1109/SISY.2010.5647408 .

Damnjanović, M.S., Živanov, Ljiljana D, Marić, Andrea M, Radosavljević, Goran, Menicanin, Aleksandar, Blaz, Nelu V., Djurić, S.M., "Characterization of ferrite surface mount bead using S-parameters" in SIISY 2010 - 8th IEEE International Symposium on Intelligent Systems and Informatics (2010):357-360,
https://doi.org/10.1109/SISY.2010.5647408 . .