TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Nikolić, Maria Vesna
AU  - Pavlović, Vladimir B
AU  - Blanusa, Jovan L
AU  - Stevanović, Suzana
AU  - Mitic, Vojislav V
AU  - Šćepanović, Maja
AU  - Vlahović, Branislav
PY  - 2014
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/761
AB  - The structure and lattice dynamics of mechanically activated BaTiO3 was investigated in this study. Phonon behavior and crystal structure stability of the obtained nanocrystalline BaTiO3 were discussed from the view point of crystallite size effects and microstrains induced by mechanical activation. A systematic study of Raman responses indicates that mechanical activation has a distinct influence on BaTiO3 lattice spectra affecting the intensity, width, and position of Raman modes. The measured Raman spectra were deconvoluted and phonon parameters were estimated. It has been established that applied mechanical activation leads to a significant decrease in the mean crystallites size, but nevertheless enables formation of tetragonal nanocrystalline BaTiO3.
PB  - Wiley, Hoboken
T2  - Journal of the American Ceramic Society
T1  - Raman Responses in Mechanically Activated BaTiO3
EP  - 608
IS  - 2
SP  - 601
VL  - 97
DO  - 10.1111/jace.12423
ER  - 

@article{
author = "Pavlović, Vera P. and Nikolić, Maria Vesna and Pavlović, Vladimir B and Blanusa, Jovan L and Stevanović, Suzana and Mitic, Vojislav V and Šćepanović, Maja and Vlahović, Branislav",
year = "2014",
abstract = "The structure and lattice dynamics of mechanically activated BaTiO3 was investigated in this study. Phonon behavior and crystal structure stability of the obtained nanocrystalline BaTiO3 were discussed from the view point of crystallite size effects and microstrains induced by mechanical activation. A systematic study of Raman responses indicates that mechanical activation has a distinct influence on BaTiO3 lattice spectra affecting the intensity, width, and position of Raman modes. The measured Raman spectra were deconvoluted and phonon parameters were estimated. It has been established that applied mechanical activation leads to a significant decrease in the mean crystallites size, but nevertheless enables formation of tetragonal nanocrystalline BaTiO3.",
publisher = "Wiley, Hoboken",
journal = "Journal of the American Ceramic Society",
title = "Raman Responses in Mechanically Activated BaTiO3",
pages = "608-601",
number = "2",
volume = "97",
doi = "10.1111/jace.12423"
}

Pavlović, V. P., Nikolić, M. V., Pavlović, V. B., Blanusa, J. L., Stevanović, S., Mitic, V. V., Šćepanović, M.,& Vlahović, B.. (2014). Raman Responses in Mechanically Activated BaTiO3. in Journal of the American Ceramic Society
Wiley, Hoboken., 97(2), 601-608.
https://doi.org/10.1111/jace.12423

Pavlović VP, Nikolić MV, Pavlović VB, Blanusa JL, Stevanović S, Mitic VV, Šćepanović M, Vlahović B. Raman Responses in Mechanically Activated BaTiO3. in Journal of the American Ceramic Society. 2014;97(2):601-608.
doi:10.1111/jace.12423 .

Pavlović, Vera P., Nikolić, Maria Vesna, Pavlović, Vladimir B, Blanusa, Jovan L, Stevanović, Suzana, Mitic, Vojislav V, Šćepanović, Maja, Vlahović, Branislav, "Raman Responses in Mechanically Activated BaTiO3" in Journal of the American Ceramic Society, 97, no. 2 (2014):601-608,
https://doi.org/10.1111/jace.12423 . .

TY  - JOUR
AU  - Pavlović, V. P.
AU  - Nikolić, Maria Vesna
AU  - Spasojević, Vojislav
AU  - Blanusa, J.
AU  - Živković, Lj.
AU  - Stojanović, Biljana D
AU  - Pavlović, Vladimir B
AU  - Ristic, M. M.
PY  - 2006
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/163
AB  - In this paper the influence of tribophysical activation on non-isothermal sintering of barium titanate has been investigated. BaTiO3 Powders were tribophysically activated in a planetary ball mill for 0, 60 and 120 min., pressed and non-isothermally sintered up to 1380 degrees C. Dilatometric analysis was performed in air in the temperature range from room temperature to 1380 degrees C with heating rates of 10, 20 and 30 degrees C/min. The samples were analyzed by the X-ray powder diffraction method. Investigation of the morphology of microstructure constituents was performed using the scanning electron microsocopy method. With the purpose of optimizing technological parameters the results obtained by microstructure analysis were correlated with the results of quantitative dilatometric analysis.
PB  - Trans Tech Publications Ltd, Durnten-Zurich
T2  - Advanced Materials Forum Iii, Pts 1 and 2
T1  - The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics
EP  - 1570
SP  - 1566
VL  - 514-516
DO  - 10.4028/www.scientific.net/MSF.514-516.1566
ER  - 

@article{
author = "Pavlović, V. P. and Nikolić, Maria Vesna and Spasojević, Vojislav and Blanusa, J. and Živković, Lj. and Stojanović, Biljana D and Pavlović, Vladimir B and Ristic, M. M.",
year = "2006",
abstract = "In this paper the influence of tribophysical activation on non-isothermal sintering of barium titanate has been investigated. BaTiO3 Powders were tribophysically activated in a planetary ball mill for 0, 60 and 120 min., pressed and non-isothermally sintered up to 1380 degrees C. Dilatometric analysis was performed in air in the temperature range from room temperature to 1380 degrees C with heating rates of 10, 20 and 30 degrees C/min. The samples were analyzed by the X-ray powder diffraction method. Investigation of the morphology of microstructure constituents was performed using the scanning electron microsocopy method. With the purpose of optimizing technological parameters the results obtained by microstructure analysis were correlated with the results of quantitative dilatometric analysis.",
publisher = "Trans Tech Publications Ltd, Durnten-Zurich",
journal = "Advanced Materials Forum Iii, Pts 1 and 2",
title = "The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics",
pages = "1570-1566",
volume = "514-516",
doi = "10.4028/www.scientific.net/MSF.514-516.1566"
}

Pavlović, V. P., Nikolić, M. V., Spasojević, V., Blanusa, J., Živković, Lj., Stojanović, B. D., Pavlović, V. B.,& Ristic, M. M.. (2006). The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics. in Advanced Materials Forum Iii, Pts 1 and 2
Trans Tech Publications Ltd, Durnten-Zurich., 514-516, 1566-1570.
https://doi.org/10.4028/www.scientific.net/MSF.514-516.1566

Pavlović VP, Nikolić MV, Spasojević V, Blanusa J, Živković L, Stojanović BD, Pavlović VB, Ristic MM. The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics. in Advanced Materials Forum Iii, Pts 1 and 2. 2006;514-516:1566-1570.
doi:10.4028/www.scientific.net/MSF.514-516.1566 .

Pavlović, V. P., Nikolić, Maria Vesna, Spasojević, Vojislav, Blanusa, J., Živković, Lj., Stojanović, Biljana D, Pavlović, Vladimir B, Ristic, M. M., "The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics" in Advanced Materials Forum Iii, Pts 1 and 2, 514-516 (2006):1566-1570,
https://doi.org/10.4028/www.scientific.net/MSF.514-516.1566 . .