TY  - JOUR
AU  - Jokanović, Dušan
AU  - Vilotić, Dragica
AU  - Šijačić-Nikolić, Mirjana
AU  - Nikolic, Vesna
AU  - Stanković, Dragica
AU  - Budic, Branislava
PY  - 2018
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1191
AB  - There have been analyzed morho-anatomical characteristics of bald cypress needles from Topcider Park (Belgrade). In order to perform the research, it was chosen 5 test stems and from all of them, 20 needles from branches and 20 needles from the trunk were taken. By descriptive statistic methods, one-factor variance analysis method (ANOVA) and LSD-test, 7 observed elements have been analyzed (needle length, needle width, needle thickness, central cylinder width, central cylinder thickness, mesophyll width and mesophyll thickness). As for anatomical structure of needles, it was related to tissue defining and differentation grade of parenchyma cells as tissues constructive elements. From anatomical point of view, the greatest difference between needles from the branches and from the trunk is related to their maturation grade. All in all, there were established some differences between these two needle types not only from morphological, but also from anatomical point of view.
PB  - Parlar Scientific Publications (P S P), Freising
T2  - Fresenius Environmental Bulletin
T1  - Variability of morpho-anatomical characteristics of bald cypress needles from topcider park (Belgrade)
EP  - 6099
IS  - 9
SP  - 6093
VL  - 27
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_1191
ER  - 

@article{
author = "Jokanović, Dušan and Vilotić, Dragica and Šijačić-Nikolić, Mirjana and Nikolic, Vesna and Stanković, Dragica and Budic, Branislava",
year = "2018",
abstract = "There have been analyzed morho-anatomical characteristics of bald cypress needles from Topcider Park (Belgrade). In order to perform the research, it was chosen 5 test stems and from all of them, 20 needles from branches and 20 needles from the trunk were taken. By descriptive statistic methods, one-factor variance analysis method (ANOVA) and LSD-test, 7 observed elements have been analyzed (needle length, needle width, needle thickness, central cylinder width, central cylinder thickness, mesophyll width and mesophyll thickness). As for anatomical structure of needles, it was related to tissue defining and differentation grade of parenchyma cells as tissues constructive elements. From anatomical point of view, the greatest difference between needles from the branches and from the trunk is related to their maturation grade. All in all, there were established some differences between these two needle types not only from morphological, but also from anatomical point of view.",
publisher = "Parlar Scientific Publications (P S P), Freising",
journal = "Fresenius Environmental Bulletin",
title = "Variability of morpho-anatomical characteristics of bald cypress needles from topcider park (Belgrade)",
pages = "6099-6093",
number = "9",
volume = "27",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_1191"
}

Jokanović, D., Vilotić, D., Šijačić-Nikolić, M., Nikolic, V., Stanković, D.,& Budic, B.. (2018). Variability of morpho-anatomical characteristics of bald cypress needles from topcider park (Belgrade). in Fresenius Environmental Bulletin
Parlar Scientific Publications (P S P), Freising., 27(9), 6093-6099.
https://hdl.handle.net/21.15107/rcub_rimsi_1191

Jokanović D, Vilotić D, Šijačić-Nikolić M, Nikolic V, Stanković D, Budic B. Variability of morpho-anatomical characteristics of bald cypress needles from topcider park (Belgrade). in Fresenius Environmental Bulletin. 2018;27(9):6093-6099.
https://hdl.handle.net/21.15107/rcub_rimsi_1191 .

Jokanović, Dušan, Vilotić, Dragica, Šijačić-Nikolić, Mirjana, Nikolic, Vesna, Stanković, Dragica, Budic, Branislava, "Variability of morpho-anatomical characteristics of bald cypress needles from topcider park (Belgrade)" in Fresenius Environmental Bulletin, 27, no. 9 (2018):6093-6099,
https://hdl.handle.net/21.15107/rcub_rimsi_1191 .

TY  - JOUR
AU  - Jokanović, Dušan
AU  - Vilotić, Dragica
AU  - Nikolic, Vesna
AU  - Šijačić-Nikolić, Mirjana
AU  - Stanković, Dragica
PY  - 2018
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1190
AB  - In the paper, there have been analyzed petioles of the beech collected from ten natural populations in Serbia. Due to performing this research, different morphological and anatomical elements of the petiole have been observed. As for morphological elements, following have been included: petiole length (cm), petiole width (mm), and petiole thickness (mm), while quantitative anatomical elements included width of central cylinder (mm) and thickness of central cylinder (mm). On the other side, based on number, distribution and shape of vascular bundles, anatomical structure of the petiole was followed. Methods of descriptive statistics have been performed in order to determine variability of each element. From anatomical point of view, slight differences have been found between different populations. As for morphological features, petiole length is the least changeable, while petiole width is the most variable. Among quantitative anatomical features, central cylinder length is the least changeable. The vascular structure of petioles and their anatomy could successfully be used as a taxonomic character.
PB  - Parlar Scientific Publications (P S P), Freising
T2  - Fresenius Environmental Bulletin
T1  - Morpho-anatomical petiole characteristics of the beech in natural populations in Serbia
EP  - 6092
IS  - 9
SP  - 6087
VL  - 27
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_1190
ER  - 

@article{
author = "Jokanović, Dušan and Vilotić, Dragica and Nikolic, Vesna and Šijačić-Nikolić, Mirjana and Stanković, Dragica",
year = "2018",
abstract = "In the paper, there have been analyzed petioles of the beech collected from ten natural populations in Serbia. Due to performing this research, different morphological and anatomical elements of the petiole have been observed. As for morphological elements, following have been included: petiole length (cm), petiole width (mm), and petiole thickness (mm), while quantitative anatomical elements included width of central cylinder (mm) and thickness of central cylinder (mm). On the other side, based on number, distribution and shape of vascular bundles, anatomical structure of the petiole was followed. Methods of descriptive statistics have been performed in order to determine variability of each element. From anatomical point of view, slight differences have been found between different populations. As for morphological features, petiole length is the least changeable, while petiole width is the most variable. Among quantitative anatomical features, central cylinder length is the least changeable. The vascular structure of petioles and their anatomy could successfully be used as a taxonomic character.",
publisher = "Parlar Scientific Publications (P S P), Freising",
journal = "Fresenius Environmental Bulletin",
title = "Morpho-anatomical petiole characteristics of the beech in natural populations in Serbia",
pages = "6092-6087",
number = "9",
volume = "27",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_1190"
}

Jokanović, D., Vilotić, D., Nikolic, V., Šijačić-Nikolić, M.,& Stanković, D.. (2018). Morpho-anatomical petiole characteristics of the beech in natural populations in Serbia. in Fresenius Environmental Bulletin
Parlar Scientific Publications (P S P), Freising., 27(9), 6087-6092.
https://hdl.handle.net/21.15107/rcub_rimsi_1190

Jokanović D, Vilotić D, Nikolic V, Šijačić-Nikolić M, Stanković D. Morpho-anatomical petiole characteristics of the beech in natural populations in Serbia. in Fresenius Environmental Bulletin. 2018;27(9):6087-6092.
https://hdl.handle.net/21.15107/rcub_rimsi_1190 .

Jokanović, Dušan, Vilotić, Dragica, Nikolic, Vesna, Šijačić-Nikolić, Mirjana, Stanković, Dragica, "Morpho-anatomical petiole characteristics of the beech in natural populations in Serbia" in Fresenius Environmental Bulletin, 27, no. 9 (2018):6087-6092,
https://hdl.handle.net/21.15107/rcub_rimsi_1190 .

TY  - JOUR
AU  - Nikolic, Vesna
AU  - Vasović, Dejan
AU  - Galjak, Mirjana
AU  - Radović, Vesela
PY  - 2013
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/690
AB  - The purpose of this paper is to present the basic elements of the research which is directed towards the development of models for learning and training of employees for green manufacturing in modern business organizations. The objective was achieved through the operationalization of the following major tasks: the theoretical research on the specific characteristics of the development of modern business organizations from the discourse of environmental protection and realisation of sustainable development strategy; reviewing the possibilities of implementing the environmental management system (ISO 14001) in the system of organizational management; directing the management of an organization, the development of tools for reducing adverse environmental impact and establishing green production. Beside the theoretical approach to the research problem, an empirical study of educational needs of employees for environmental protection in Serbian company was conducted. The observation and description of best practices of corporate learning for environmental protection in some modern and internationally-known business organizations were made as well.It is possible to enable the contemporary society to build "a green society of future" by the means of the policy of sustainable development, education and development of corporate responsibility and awareness of the needs for sustainability and green production. Sustainable development implies the transformation of existing technologies towards cleaner ones which see the environmental sustainability in prevention not in treatment. In order to achieve these goal standards for environmental protection (EMS) were adopted as a part of overall system of organizational management. These are used for the development and application of environmental policy and for the management of environmental aspects. Our findings confirm the need for the transformation of existing organizations into learning organizations as a prerequisite for realisation of green manufacturing industries. Comparative analysis of examples of good practice has helped to identify the benefits achieved in companies by the improvement of corporate learning for sustainable development and environmental protection.Implementation of research tasks are to realize immediate implications for development and implementation for training and teaching staf staff for the protection of the environment in modern business organizations in accordance with modern environmental standards and principles of sustainable development. The practical implications relate to the creation of organizational, programmatic and methodological structure, training of employees for the environmental protection that will enable the appropriate transfer and dissemination of knowledge in this field. At the same time, research opens up new tasks that are directed to the constant questioning of corporate policy and thinking skills that we need for tomorrow's world and a sustainable future. This paper presents the information about new alternatives for teaching and learning of employees in corporate systems. It offers the reader new approaches to development of green manufacturing and modelling the corporate behaviour in accordance with the strategy of environmental protection and sustainable development principles.
PB  - Editura Stiintifica Fmr, Bucharest
T2  - Metalurgia International
T1  - Environmental management system, green manufacturing and corporate learning from the discourse of sustainable development
EP  - 220
IS  - 3
SP  - 214
VL  - 18
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_690
ER  - 

@article{
author = "Nikolic, Vesna and Vasović, Dejan and Galjak, Mirjana and Radović, Vesela",
year = "2013",
abstract = "The purpose of this paper is to present the basic elements of the research which is directed towards the development of models for learning and training of employees for green manufacturing in modern business organizations. The objective was achieved through the operationalization of the following major tasks: the theoretical research on the specific characteristics of the development of modern business organizations from the discourse of environmental protection and realisation of sustainable development strategy; reviewing the possibilities of implementing the environmental management system (ISO 14001) in the system of organizational management; directing the management of an organization, the development of tools for reducing adverse environmental impact and establishing green production. Beside the theoretical approach to the research problem, an empirical study of educational needs of employees for environmental protection in Serbian company was conducted. The observation and description of best practices of corporate learning for environmental protection in some modern and internationally-known business organizations were made as well.It is possible to enable the contemporary society to build "a green society of future" by the means of the policy of sustainable development, education and development of corporate responsibility and awareness of the needs for sustainability and green production. Sustainable development implies the transformation of existing technologies towards cleaner ones which see the environmental sustainability in prevention not in treatment. In order to achieve these goal standards for environmental protection (EMS) were adopted as a part of overall system of organizational management. These are used for the development and application of environmental policy and for the management of environmental aspects. Our findings confirm the need for the transformation of existing organizations into learning organizations as a prerequisite for realisation of green manufacturing industries. Comparative analysis of examples of good practice has helped to identify the benefits achieved in companies by the improvement of corporate learning for sustainable development and environmental protection.Implementation of research tasks are to realize immediate implications for development and implementation for training and teaching staf staff for the protection of the environment in modern business organizations in accordance with modern environmental standards and principles of sustainable development. The practical implications relate to the creation of organizational, programmatic and methodological structure, training of employees for the environmental protection that will enable the appropriate transfer and dissemination of knowledge in this field. At the same time, research opens up new tasks that are directed to the constant questioning of corporate policy and thinking skills that we need for tomorrow's world and a sustainable future. This paper presents the information about new alternatives for teaching and learning of employees in corporate systems. It offers the reader new approaches to development of green manufacturing and modelling the corporate behaviour in accordance with the strategy of environmental protection and sustainable development principles.",
publisher = "Editura Stiintifica Fmr, Bucharest",
journal = "Metalurgia International",
title = "Environmental management system, green manufacturing and corporate learning from the discourse of sustainable development",
pages = "220-214",
number = "3",
volume = "18",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_690"
}

Nikolic, V., Vasović, D., Galjak, M.,& Radović, V.. (2013). Environmental management system, green manufacturing and corporate learning from the discourse of sustainable development. in Metalurgia International
Editura Stiintifica Fmr, Bucharest., 18(3), 214-220.
https://hdl.handle.net/21.15107/rcub_rimsi_690

Nikolic V, Vasović D, Galjak M, Radović V. Environmental management system, green manufacturing and corporate learning from the discourse of sustainable development. in Metalurgia International. 2013;18(3):214-220.
https://hdl.handle.net/21.15107/rcub_rimsi_690 .

Nikolic, Vesna, Vasović, Dejan, Galjak, Mirjana, Radović, Vesela, "Environmental management system, green manufacturing and corporate learning from the discourse of sustainable development" in Metalurgia International, 18, no. 3 (2013):214-220,
https://hdl.handle.net/21.15107/rcub_rimsi_690 .