TY  - CONF
AU  - Kisić, M.
AU  - Babković, K.
AU  - Radovanović, M.
AU  - Menicanin, Aleksandar
AU  - Živanov, Ljiljana D
AU  - Damnjanović, M.
PY  - 2012
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/564
AB  - The goal of this work is to investigate the efficiency of a ferrite electromagnetic interference (EMI) suppressor when it is placed in a real surrounding. Because of that, commercially available ferrite component is tested in a simple digital circuit realized on PCB. Two configurations of digital circuits are analyzed: with and without EMI suppressor placed on a conductive line at the output of the first circuit, which is a potential "source" of the interference. The measurement is obtained by digital oscilloscope TDS 2024B in the frequency range up to 200 MHz. Measured data with and without implemented EMI suppressor are presented.
C3  - 2012 28th International Conference on Microelectronics - Proceedings, MIEL 2012
T1  - Performance Analysis of EMI suppressors in Reduction of Ground Bounce on a PCB
EP  - 188
SP  - 185
DO  - 10.1109/MIEL.2012.6222829
ER  - 

@conference{
author = "Kisić, M. and Babković, K. and Radovanović, M. and Menicanin, Aleksandar and Živanov, Ljiljana D and Damnjanović, M.",
year = "2012",
abstract = "The goal of this work is to investigate the efficiency of a ferrite electromagnetic interference (EMI) suppressor when it is placed in a real surrounding. Because of that, commercially available ferrite component is tested in a simple digital circuit realized on PCB. Two configurations of digital circuits are analyzed: with and without EMI suppressor placed on a conductive line at the output of the first circuit, which is a potential "source" of the interference. The measurement is obtained by digital oscilloscope TDS 2024B in the frequency range up to 200 MHz. Measured data with and without implemented EMI suppressor are presented.",
journal = "2012 28th International Conference on Microelectronics - Proceedings, MIEL 2012",
title = "Performance Analysis of EMI suppressors in Reduction of Ground Bounce on a PCB",
pages = "188-185",
doi = "10.1109/MIEL.2012.6222829"
}

Kisić, M., Babković, K., Radovanović, M., Menicanin, A., Živanov, L. D.,& Damnjanović, M.. (2012). Performance Analysis of EMI suppressors in Reduction of Ground Bounce on a PCB. in 2012 28th International Conference on Microelectronics - Proceedings, MIEL 2012, 185-188.
https://doi.org/10.1109/MIEL.2012.6222829

Kisić M, Babković K, Radovanović M, Menicanin A, Živanov LD, Damnjanović M. Performance Analysis of EMI suppressors in Reduction of Ground Bounce on a PCB. in 2012 28th International Conference on Microelectronics - Proceedings, MIEL 2012. 2012;:185-188.
doi:10.1109/MIEL.2012.6222829 .

Kisić, M., Babković, K., Radovanović, M., Menicanin, Aleksandar, Živanov, Ljiljana D, Damnjanović, M., "Performance Analysis of EMI suppressors in Reduction of Ground Bounce on a PCB" in 2012 28th International Conference on Microelectronics - Proceedings, MIEL 2012 (2012):185-188,
https://doi.org/10.1109/MIEL.2012.6222829 . .

TY  - CONF
AU  - Kisić, M.
AU  - Žlebič, Č.
AU  - Damnjanović, M.
AU  - Babković, K.
AU  - Menicanin, Aleksandar
AU  - Živanov, Ljiljana D
PY  - 2012
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/560
AB  - Noise generated by a logic gate in a simple digital circuit is considered in this paper. Appropriate circuit design and usage of electromagnetic interference (EMI) components are methods intended to suppress noise radiation by reducing/eliminating the noise flowing through conductive lines. Because of that, commercially available ferrite component is tested in a simple digital circuits realized on a PCB. Different configurations of digital circuit are analyzed: circuit printed on single-sided and double-sided board, with and without EMI suppressors placed on the conductive line at the input of circuit. With attention to the current distribution, the mounting position is observed for ferrite where it has significant noise effect. The measurements are obtained by digital oscilloscope TDS 2024B in the frequency range up to 200 MHz, and CTM030 Scan EM-EC magnetic probe with frequency response 2 MHz - 2 GHz which observe the waveform of the current. The measured data showed variations in noise suppressing effect depending on the design of circuit and by adding EMI suppressors.
PB  - IEEE
C3  - 2012 IEEE 10th Jubilee International Symposium on Intelligent Systems and Informatics, SISY 2012
T1  - Interference in digital circuits and some techniques for EMI suppression
EP  - 437
SP  - 433
DO  - 10.1109/SISY.2012.6339559
ER  - 

@conference{
author = "Kisić, M. and Žlebič, Č. and Damnjanović, M. and Babković, K. and Menicanin, Aleksandar and Živanov, Ljiljana D",
year = "2012",
abstract = "Noise generated by a logic gate in a simple digital circuit is considered in this paper. Appropriate circuit design and usage of electromagnetic interference (EMI) components are methods intended to suppress noise radiation by reducing/eliminating the noise flowing through conductive lines. Because of that, commercially available ferrite component is tested in a simple digital circuits realized on a PCB. Different configurations of digital circuit are analyzed: circuit printed on single-sided and double-sided board, with and without EMI suppressors placed on the conductive line at the input of circuit. With attention to the current distribution, the mounting position is observed for ferrite where it has significant noise effect. The measurements are obtained by digital oscilloscope TDS 2024B in the frequency range up to 200 MHz, and CTM030 Scan EM-EC magnetic probe with frequency response 2 MHz - 2 GHz which observe the waveform of the current. The measured data showed variations in noise suppressing effect depending on the design of circuit and by adding EMI suppressors.",
publisher = "IEEE",
journal = "2012 IEEE 10th Jubilee International Symposium on Intelligent Systems and Informatics, SISY 2012",
title = "Interference in digital circuits and some techniques for EMI suppression",
pages = "437-433",
doi = "10.1109/SISY.2012.6339559"
}

Kisić, M., Žlebič, Č., Damnjanović, M., Babković, K., Menicanin, A.,& Živanov, L. D.. (2012). Interference in digital circuits and some techniques for EMI suppression. in 2012 IEEE 10th Jubilee International Symposium on Intelligent Systems and Informatics, SISY 2012
IEEE., 433-437.
https://doi.org/10.1109/SISY.2012.6339559

Kisić M, Žlebič Č, Damnjanović M, Babković K, Menicanin A, Živanov LD. Interference in digital circuits and some techniques for EMI suppression. in 2012 IEEE 10th Jubilee International Symposium on Intelligent Systems and Informatics, SISY 2012. 2012;:433-437.
doi:10.1109/SISY.2012.6339559 .

Kisić, M., Žlebič, Č., Damnjanović, M., Babković, K., Menicanin, Aleksandar, Živanov, Ljiljana D, "Interference in digital circuits and some techniques for EMI suppression" in 2012 IEEE 10th Jubilee International Symposium on Intelligent Systems and Informatics, SISY 2012 (2012):433-437,
https://doi.org/10.1109/SISY.2012.6339559 . .

TY  - CONF
AU  - Kisic, Milica
AU  - Babković, K.
AU  - Krstić, Dejan
AU  - Radovanović, Milan
AU  - Menicanin, Aleksandar
AU  - Zivanov, Ljiljana
AU  - Damnjanovic, Mirjana
PY  - 2011
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/3159
AB  - Ground noise voltage generated by a logic gate on a signal return conductor is investigated in this paper. An analytical method for calculating the ground bounce and the factors that affect it are discussed. The efficiency of a ferrite EMI suppressor in minimizing its effects is also investigated. The measurement is obtained by digital oscilloscope. Measured data with and without implemented EMI suppressor are presented. The impact of various transition times of the driving signal on the ground bounce is analyzed and measured data are given. The measurement is obtained using an HP 8082A pulse generator.
C3  - IEEE 16th International Symposium on Power Electronics-Ee2011
T1  - Ground Bounce Reduction in Digital Circuit Using EMI Suppressors
EP  - 5
IS  - T4-2.8
SP  - 1
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_3159
ER  - 

@conference{
author = "Kisic, Milica and Babković, K. and Krstić, Dejan and Radovanović, Milan and Menicanin, Aleksandar and Zivanov, Ljiljana and Damnjanovic, Mirjana",
year = "2011",
abstract = "Ground noise voltage generated by a logic gate on a signal return conductor is investigated in this paper. An analytical method for calculating the ground bounce and the factors that affect it are discussed. The efficiency of a ferrite EMI suppressor in minimizing its effects is also investigated. The measurement is obtained by digital oscilloscope. Measured data with and without implemented EMI suppressor are presented. The impact of various transition times of the driving signal on the ground bounce is analyzed and measured data are given. The measurement is obtained using an HP 8082A pulse generator.",
journal = "IEEE 16th International Symposium on Power Electronics-Ee2011",
title = "Ground Bounce Reduction in Digital Circuit Using EMI Suppressors",
pages = "5-1",
number = "T4-2.8",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_3159"
}

Kisic, M., Babković, K., Krstić, D., Radovanović, M., Menicanin, A., Zivanov, L.,& Damnjanovic, M.. (2011). Ground Bounce Reduction in Digital Circuit Using EMI Suppressors. in IEEE 16th International Symposium on Power Electronics-Ee2011(T4-2.8), 1-5.
https://hdl.handle.net/21.15107/rcub_rimsi_3159

Kisic M, Babković K, Krstić D, Radovanović M, Menicanin A, Zivanov L, Damnjanovic M. Ground Bounce Reduction in Digital Circuit Using EMI Suppressors. in IEEE 16th International Symposium on Power Electronics-Ee2011. 2011;(T4-2.8):1-5.
https://hdl.handle.net/21.15107/rcub_rimsi_3159 .

Kisic, Milica, Babković, K., Krstić, Dejan, Radovanović, Milan, Menicanin, Aleksandar, Zivanov, Ljiljana, Damnjanovic, Mirjana, "Ground Bounce Reduction in Digital Circuit Using EMI Suppressors" in IEEE 16th International Symposium on Power Electronics-Ee2011, no. T4-2.8 (2011):1-5,
https://hdl.handle.net/21.15107/rcub_rimsi_3159 .