TY  - JOUR
AU  - Matović, Luka
AU  - Tasić, Nikola
AU  - Trisović, Nemanja
AU  - Ladarević, Jelena
AU  - Vitnik, Vesna
AU  - Vitnik, Zeljko
AU  - Grgur, Branimir
AU  - Mijin, Dušan
PY  - 2019
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1250
AB  - In order to get a better insight into the relationship between molecular structure and photovoltaic performance, six monoazo dye molecules containing benzoic and cinnamic acid moieties were synthesized and their photovoltaic properties were studied. Three of them have not been previously used in solar cells. Spectroscopic measurements of the investigated compounds coupled with theoretical calculations were performed. Short-circuit current density, open-circuit voltage, and fill-factor were determined. It was found that a larger amount of short-circuit current density will be generated if the HOMO-LUMO energy gap is lower, determined by the stability of the molecule and the electronic effect of the donor moiety. Among both series of synthesized dye molecules, the highest obtained values of short-circuit current density were achieved with (2-hydroxynaphthalene-1-ylazo)benzoic acid and (2-hydroxynaphthalene-1-ylazo)cinnamic acid, and thus they were regarded as promising candidates for application in dye-sensitized solar cells.
PB  - Scientific Technical Research Council Turkey-Tubitak, Ankara
T2  - Turkish Journal of Chemistry
T1  - On the azo dyes derived from benzoic and cinnamic acids used as photosensitizers in dye-sensitized solar cells
EP  - 1203
IS  - 4
SP  - 1183
VL  - 43
DO  - 10.3906/kim-1903-76
ER  - 

@article{
author = "Matović, Luka and Tasić, Nikola and Trisović, Nemanja and Ladarević, Jelena and Vitnik, Vesna and Vitnik, Zeljko and Grgur, Branimir and Mijin, Dušan",
year = "2019",
abstract = "In order to get a better insight into the relationship between molecular structure and photovoltaic performance, six monoazo dye molecules containing benzoic and cinnamic acid moieties were synthesized and their photovoltaic properties were studied. Three of them have not been previously used in solar cells. Spectroscopic measurements of the investigated compounds coupled with theoretical calculations were performed. Short-circuit current density, open-circuit voltage, and fill-factor were determined. It was found that a larger amount of short-circuit current density will be generated if the HOMO-LUMO energy gap is lower, determined by the stability of the molecule and the electronic effect of the donor moiety. Among both series of synthesized dye molecules, the highest obtained values of short-circuit current density were achieved with (2-hydroxynaphthalene-1-ylazo)benzoic acid and (2-hydroxynaphthalene-1-ylazo)cinnamic acid, and thus they were regarded as promising candidates for application in dye-sensitized solar cells.",
publisher = "Scientific Technical Research Council Turkey-Tubitak, Ankara",
journal = "Turkish Journal of Chemistry",
title = "On the azo dyes derived from benzoic and cinnamic acids used as photosensitizers in dye-sensitized solar cells",
pages = "1203-1183",
number = "4",
volume = "43",
doi = "10.3906/kim-1903-76"
}

Matović, L., Tasić, N., Trisović, N., Ladarević, J., Vitnik, V., Vitnik, Z., Grgur, B.,& Mijin, D.. (2019). On the azo dyes derived from benzoic and cinnamic acids used as photosensitizers in dye-sensitized solar cells. in Turkish Journal of Chemistry
Scientific Technical Research Council Turkey-Tubitak, Ankara., 43(4), 1183-1203.
https://doi.org/10.3906/kim-1903-76

Matović L, Tasić N, Trisović N, Ladarević J, Vitnik V, Vitnik Z, Grgur B, Mijin D. On the azo dyes derived from benzoic and cinnamic acids used as photosensitizers in dye-sensitized solar cells. in Turkish Journal of Chemistry. 2019;43(4):1183-1203.
doi:10.3906/kim-1903-76 .

Matović, Luka, Tasić, Nikola, Trisović, Nemanja, Ladarević, Jelena, Vitnik, Vesna, Vitnik, Zeljko, Grgur, Branimir, Mijin, Dušan, "On the azo dyes derived from benzoic and cinnamic acids used as photosensitizers in dye-sensitized solar cells" in Turkish Journal of Chemistry, 43, no. 4 (2019):1183-1203,
https://doi.org/10.3906/kim-1903-76 . .

TY  - JOUR
AU  - Grgur, BN
AU  - Krstajić, Nedeljko V
AU  - Elezović, Nevenka R.
AU  - Jović, Vladimir D
PY  - 2005
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/114
AB  - Fe-Mo alloys were electrodeposited from a pyrophosphate bath using a single diode rectified AC current. Their composition and morphology were investigated by SEM, optical microscopy and EDS, in order to determine the influence of the deposition conditions on the morphology and composition of these alloys. It was shown that the electrodeposition parameters, such as: chemical bath composition and current density, influenced both the composition of the Fe Mo alloys and the current efficiency for their deposition, while the micro and macro-morphology did not change significantly with changing conditions of alloy electrodeposition. It was found that the electrodeposited Fe Mo alloys possessed a 0.15 V to 0.30 V lower overvoltage than mild steel for hydrogen evolution in ail electrolyte commonly used in commercial chlorate production, depending on the alloy composition, i.e., the conditions of alloy electrodeposition.
PB  - Srpsko hemijsko društvo, Beograd
T2  - Journal of the Serbian Chemical Society
T1  - Electrodeposition and characterization of Fe-Mo alloys as cathodes for hydrogen evolution in the process of chlorate production
EP  - 889
IS  - 6
SP  - 879
VL  - 70
DO  - 10.2298/JSC0506879G
ER  - 

@article{
author = "Grgur, BN and Krstajić, Nedeljko V and Elezović, Nevenka R. and Jović, Vladimir D",
year = "2005",
abstract = "Fe-Mo alloys were electrodeposited from a pyrophosphate bath using a single diode rectified AC current. Their composition and morphology were investigated by SEM, optical microscopy and EDS, in order to determine the influence of the deposition conditions on the morphology and composition of these alloys. It was shown that the electrodeposition parameters, such as: chemical bath composition and current density, influenced both the composition of the Fe Mo alloys and the current efficiency for their deposition, while the micro and macro-morphology did not change significantly with changing conditions of alloy electrodeposition. It was found that the electrodeposited Fe Mo alloys possessed a 0.15 V to 0.30 V lower overvoltage than mild steel for hydrogen evolution in ail electrolyte commonly used in commercial chlorate production, depending on the alloy composition, i.e., the conditions of alloy electrodeposition.",
publisher = "Srpsko hemijsko društvo, Beograd",
journal = "Journal of the Serbian Chemical Society",
title = "Electrodeposition and characterization of Fe-Mo alloys as cathodes for hydrogen evolution in the process of chlorate production",
pages = "889-879",
number = "6",
volume = "70",
doi = "10.2298/JSC0506879G"
}

Grgur, B., Krstajić, N. V., Elezović, N. R.,& Jović, V. D.. (2005). Electrodeposition and characterization of Fe-Mo alloys as cathodes for hydrogen evolution in the process of chlorate production. in Journal of the Serbian Chemical Society
Srpsko hemijsko društvo, Beograd., 70(6), 879-889.
https://doi.org/10.2298/JSC0506879G

Grgur B, Krstajić NV, Elezović NR, Jović VD. Electrodeposition and characterization of Fe-Mo alloys as cathodes for hydrogen evolution in the process of chlorate production. in Journal of the Serbian Chemical Society. 2005;70(6):879-889.
doi:10.2298/JSC0506879G .

Grgur, BN, Krstajić, Nedeljko V, Elezović, Nevenka R., Jović, Vladimir D, "Electrodeposition and characterization of Fe-Mo alloys as cathodes for hydrogen evolution in the process of chlorate production" in Journal of the Serbian Chemical Society, 70, no. 6 (2005):879-889,
https://doi.org/10.2298/JSC0506879G . .