TY  - JOUR
AU  - Mitric, J.
AU  - Paunović, Novica
AU  - Mitrić, Miodrag
AU  - Ćirković, Jovana
AU  - Gilic, M.
AU  - Romčević, Maja
AU  - Romčević, Nebojša
PY  - 2021
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1467
AB  - In this paper two methods of preparation of yttrium orthovanadate nanopowders were presented: Solid State Reaction (top - down approach) and Solution Combustion Synthesis (bottom - up approach). For starting structural characterization, X - Ray Powder Diffraction (XPRD) and Field Emission Scanning Electron Microscopy (FESEM) were used. We report the change in reflection spectra in europium doped YVO4 nanopowders with comparison to its bulk analog. In UV-Vis reflection spectra we consider the change in values of band gap in these structures, after resizing it from bulk to nanomaterial. In Far - Infrared (FIR) reflection spectra, we registered the existence of Surface Optical Phonon (SOP) and different multi - phonon processes which alter the reflection spectra of bulk YVO4 . The influence of Eu ions is reflected through multi - phonon processes that occur and are connected with energy transfer from YVO4 lattice to Eu ions. All IR spectra were modeled using classical oscillator model with Drude part added which takes into account the free carrier contribution. Since our samples are distinctively inhomogeneous materials, we use Effective Medium theory in Maxwell Garnett approximation to model its effective dieletric function.
PB  - Elsevier, Amsterdam
T2  - Physica E-Low-Dimensional Systems & Nanostructures
T1  - Surface optical phonon and multi - phonon transitions in YVO4: Eu3+ nanopowders
VL  - 134
DO  - 10.1016/j.physe.2021.114923
ER  - 

@article{
author = "Mitric, J. and Paunović, Novica and Mitrić, Miodrag and Ćirković, Jovana and Gilic, M. and Romčević, Maja and Romčević, Nebojša",
year = "2021",
abstract = "In this paper two methods of preparation of yttrium orthovanadate nanopowders were presented: Solid State Reaction (top - down approach) and Solution Combustion Synthesis (bottom - up approach). For starting structural characterization, X - Ray Powder Diffraction (XPRD) and Field Emission Scanning Electron Microscopy (FESEM) were used. We report the change in reflection spectra in europium doped YVO4 nanopowders with comparison to its bulk analog. In UV-Vis reflection spectra we consider the change in values of band gap in these structures, after resizing it from bulk to nanomaterial. In Far - Infrared (FIR) reflection spectra, we registered the existence of Surface Optical Phonon (SOP) and different multi - phonon processes which alter the reflection spectra of bulk YVO4 . The influence of Eu ions is reflected through multi - phonon processes that occur and are connected with energy transfer from YVO4 lattice to Eu ions. All IR spectra were modeled using classical oscillator model with Drude part added which takes into account the free carrier contribution. Since our samples are distinctively inhomogeneous materials, we use Effective Medium theory in Maxwell Garnett approximation to model its effective dieletric function.",
publisher = "Elsevier, Amsterdam",
journal = "Physica E-Low-Dimensional Systems & Nanostructures",
title = "Surface optical phonon and multi - phonon transitions in YVO4: Eu3+ nanopowders",
volume = "134",
doi = "10.1016/j.physe.2021.114923"
}

Mitric, J., Paunović, N., Mitrić, M., Ćirković, J., Gilic, M., Romčević, M.,& Romčević, N.. (2021). Surface optical phonon and multi - phonon transitions in YVO4: Eu3+ nanopowders. in Physica E-Low-Dimensional Systems & Nanostructures
Elsevier, Amsterdam., 134.
https://doi.org/10.1016/j.physe.2021.114923

Mitric J, Paunović N, Mitrić M, Ćirković J, Gilic M, Romčević M, Romčević N. Surface optical phonon and multi - phonon transitions in YVO4: Eu3+ nanopowders. in Physica E-Low-Dimensional Systems & Nanostructures. 2021;134.
doi:10.1016/j.physe.2021.114923 .

Mitric, J., Paunović, Novica, Mitrić, Miodrag, Ćirković, Jovana, Gilic, M., Romčević, Maja, Romčević, Nebojša, "Surface optical phonon and multi - phonon transitions in YVO4: Eu3+ nanopowders" in Physica E-Low-Dimensional Systems & Nanostructures, 134 (2021),
https://doi.org/10.1016/j.physe.2021.114923 . .

TY  - JOUR
AU  - Gilic, Martina
AU  - Petrović, Milica
AU  - Ćirković, Jovana
AU  - Paunović, Novica
AU  - Savic-Sević, Svetlana
AU  - Nikitović, Zeljka
AU  - Romčević, Maja
AU  - Yahia, Ibrahim
AU  - Romčević, Nebojša
PY  - 2017
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1031
AB  - Thin films of CuSe2 nanoparticles embedded in selenium matrix were prepared by vacuum evaporation method on a glass substrate at room temperature. The optical properties of the films were investigated by photoluminescence spectroscopy (T = 20-300K) and UV-VIS spectroscopy (T = 300K). Surface morphology was investigated by scanning electron microscopy. The band gap for direct transition in CuSe2 was found to be in the range of 2.72-2.75 eV and that for indirect transition is in the range of 1.71-1.75 eV determined by UV-VIS spectroscopy. On the other hand, selenium exhibits direct band gap in the range of 2.33-2.36 eV. All estimated band gaps slightly decrease with the increase of the film thickness. Photoluminescence spectra of the thin films clearly show emission bands at about 1.63 and 2.32 eV at room temperature, with no shift observed with decreasing temperature. A model was proposed for explaining such anomaly.
PB  - Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad
T2  - Processing and Application of Ceramics
T1  - Low-temperature photoluminescence of CuSe2 nano-objects in selenium thin films
EP  - 135
IS  - 2
SP  - 127
VL  - 11
DO  - 10.2298/PAC1702127G
ER  - 

@article{
author = "Gilic, Martina and Petrović, Milica and Ćirković, Jovana and Paunović, Novica and Savic-Sević, Svetlana and Nikitović, Zeljka and Romčević, Maja and Yahia, Ibrahim and Romčević, Nebojša",
year = "2017",
abstract = "Thin films of CuSe2 nanoparticles embedded in selenium matrix were prepared by vacuum evaporation method on a glass substrate at room temperature. The optical properties of the films were investigated by photoluminescence spectroscopy (T = 20-300K) and UV-VIS spectroscopy (T = 300K). Surface morphology was investigated by scanning electron microscopy. The band gap for direct transition in CuSe2 was found to be in the range of 2.72-2.75 eV and that for indirect transition is in the range of 1.71-1.75 eV determined by UV-VIS spectroscopy. On the other hand, selenium exhibits direct band gap in the range of 2.33-2.36 eV. All estimated band gaps slightly decrease with the increase of the film thickness. Photoluminescence spectra of the thin films clearly show emission bands at about 1.63 and 2.32 eV at room temperature, with no shift observed with decreasing temperature. A model was proposed for explaining such anomaly.",
publisher = "Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad",
journal = "Processing and Application of Ceramics",
title = "Low-temperature photoluminescence of CuSe2 nano-objects in selenium thin films",
pages = "135-127",
number = "2",
volume = "11",
doi = "10.2298/PAC1702127G"
}

Gilic, M., Petrović, M., Ćirković, J., Paunović, N., Savic-Sević, S., Nikitović, Z., Romčević, M., Yahia, I.,& Romčević, N.. (2017). Low-temperature photoluminescence of CuSe2 nano-objects in selenium thin films. in Processing and Application of Ceramics
Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad., 11(2), 127-135.
https://doi.org/10.2298/PAC1702127G

Gilic M, Petrović M, Ćirković J, Paunović N, Savic-Sević S, Nikitović Z, Romčević M, Yahia I, Romčević N. Low-temperature photoluminescence of CuSe2 nano-objects in selenium thin films. in Processing and Application of Ceramics. 2017;11(2):127-135.
doi:10.2298/PAC1702127G .

Gilic, Martina, Petrović, Milica, Ćirković, Jovana, Paunović, Novica, Savic-Sević, Svetlana, Nikitović, Zeljka, Romčević, Maja, Yahia, Ibrahim, Romčević, Nebojša, "Low-temperature photoluminescence of CuSe2 nano-objects in selenium thin films" in Processing and Application of Ceramics, 11, no. 2 (2017):127-135,
https://doi.org/10.2298/PAC1702127G . .

TY  - JOUR
AU  - Stojadinović, B.
AU  - Dohcević-Mitrović, Zorana
AU  - Paunović, Novica
AU  - Ilić, Nikola
AU  - Tasić, Nikola
AU  - Petronijević, I.
AU  - Popović, D.
AU  - Stojanović, Biljana D
PY  - 2016
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/981
AB  - Polycrystalline Bi1-xPr(Ce)(x)FeO3 ceramics (x = 0, 0.03, 0.05 and 0.10) were prepared by auto-combustion method using urea as a fuel. The influence of Pr(Ce) doping on structural, vibrational, morphological, dielectric and ferroelectric properties of BiFeO3 polycrystalline ceramics was investigated. From X-ray diffraction (XRD) and scanning electron microscopy measurements it was observed that Pr(Ce) doping generated a reduction of the crystallite (grain) size of BiFeO3 and contraction of the rhombohedral cell due to the increased compressive strain. The changes seen in the XRD and Raman spectra of 10% Pr(Ce)doped samples, pointed to a probable appearance of orthorhombic (pseudotetragonal) crystal structure. The pristine BiFeO3 exhibited rounded shape, non-saturated ferroelectric hysteresis loop. The dielectric constant and dielectric loss have shown strong dispersion at lower frequencies, typical for conductive BiFeO3. Dielectric and ferroelectric properties at room temperature were improved with Pr doping. Concerning the Ce-doped samples, only the 3% Ce-doped sample exhibited a better shaped hysteresis loop and improved dielectric properties compared to the pristine BiFeO3. With further increase of Ce content the ferroelectric properties degraded.
PB  - Elsevier Science Sa, Lausanne
T2  - Journal of Alloys and Compounds
T1  - Comparative study of structural and electrical properties of Pr and Ce doped BiFeO3 ceramics synthesized by auto-combustion method
EP  - 872
SP  - 866
VL  - 657
DO  - 10.1016/j.jallcom.2015.09.235
ER  - 

@article{
author = "Stojadinović, B. and Dohcević-Mitrović, Zorana and Paunović, Novica and Ilić, Nikola and Tasić, Nikola and Petronijević, I. and Popović, D. and Stojanović, Biljana D",
year = "2016",
abstract = "Polycrystalline Bi1-xPr(Ce)(x)FeO3 ceramics (x = 0, 0.03, 0.05 and 0.10) were prepared by auto-combustion method using urea as a fuel. The influence of Pr(Ce) doping on structural, vibrational, morphological, dielectric and ferroelectric properties of BiFeO3 polycrystalline ceramics was investigated. From X-ray diffraction (XRD) and scanning electron microscopy measurements it was observed that Pr(Ce) doping generated a reduction of the crystallite (grain) size of BiFeO3 and contraction of the rhombohedral cell due to the increased compressive strain. The changes seen in the XRD and Raman spectra of 10% Pr(Ce)doped samples, pointed to a probable appearance of orthorhombic (pseudotetragonal) crystal structure. The pristine BiFeO3 exhibited rounded shape, non-saturated ferroelectric hysteresis loop. The dielectric constant and dielectric loss have shown strong dispersion at lower frequencies, typical for conductive BiFeO3. Dielectric and ferroelectric properties at room temperature were improved with Pr doping. Concerning the Ce-doped samples, only the 3% Ce-doped sample exhibited a better shaped hysteresis loop and improved dielectric properties compared to the pristine BiFeO3. With further increase of Ce content the ferroelectric properties degraded.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Journal of Alloys and Compounds",
title = "Comparative study of structural and electrical properties of Pr and Ce doped BiFeO3 ceramics synthesized by auto-combustion method",
pages = "872-866",
volume = "657",
doi = "10.1016/j.jallcom.2015.09.235"
}

Stojadinović, B., Dohcević-Mitrović, Z., Paunović, N., Ilić, N., Tasić, N., Petronijević, I., Popović, D.,& Stojanović, B. D.. (2016). Comparative study of structural and electrical properties of Pr and Ce doped BiFeO3 ceramics synthesized by auto-combustion method. in Journal of Alloys and Compounds
Elsevier Science Sa, Lausanne., 657, 866-872.
https://doi.org/10.1016/j.jallcom.2015.09.235

Stojadinović B, Dohcević-Mitrović Z, Paunović N, Ilić N, Tasić N, Petronijević I, Popović D, Stojanović BD. Comparative study of structural and electrical properties of Pr and Ce doped BiFeO3 ceramics synthesized by auto-combustion method. in Journal of Alloys and Compounds. 2016;657:866-872.
doi:10.1016/j.jallcom.2015.09.235 .

Stojadinović, B., Dohcević-Mitrović, Zorana, Paunović, Novica, Ilić, Nikola, Tasić, Nikola, Petronijević, I., Popović, D., Stojanović, Biljana D, "Comparative study of structural and electrical properties of Pr and Ce doped BiFeO3 ceramics synthesized by auto-combustion method" in Journal of Alloys and Compounds, 657 (2016):866-872,
https://doi.org/10.1016/j.jallcom.2015.09.235 . .

TY  - JOUR
AU  - Lazarević, Zorica Z
AU  - Vijatović Petrović, Mirjana
AU  - Dohcević-Mitrović, Zorana
AU  - Romčević, Nebojša
AU  - Romčević, Maja
AU  - Paunović, Novica
AU  - Stojanović, Biljana D
PY  - 2010
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/419
AB  - BaTiO3 ceramic powders were prepared by a complex method based on the Pechini type reaction route and mechanically assisted synthesis. In both ways BaTiO3 ceramics were sintered after 120 min on 1300 degrees C without pre-calcination steps. The crystal structure was investigated by the XRD, IR and Raman spectroscopy. The particle size and morphology of BaTiO3 were examined by XRD and SEM. The XRD results of powders indicate the formation of cubic phase of BaTiO3. It can be observed that in the case of Pechini process BaTiO3 powder is well crystallized but in the case of mechanochemistry process, significant amount of amorphous phase was detected. The sintered BaTiO3 ceramic sample prepared by Pechini process, shows the formation of tetragonal phase. However, IR and Raman spectrum showed a mixture of cubic and tetragonal for BaTiO3 obtained by Pechini process and tetragonal for BaTiO3 obtained by mechanically assisted synthesis.
PB  - Elsevier Sci Ltd, Oxford
T2  - Journal of the European Ceramic Society
T1  - The characterization of the barium titanate ceramic powders prepared by the Pechini type reaction route and mechanically assisted synthesis
EP  - 628
IS  - 2
SP  - 623
VL  - 30
DO  - 10.1016/j.jeurceramsoc.2009.08.011
ER  - 

@article{
author = "Lazarević, Zorica Z and Vijatović Petrović, Mirjana and Dohcević-Mitrović, Zorana and Romčević, Nebojša and Romčević, Maja and Paunović, Novica and Stojanović, Biljana D",
year = "2010",
abstract = "BaTiO3 ceramic powders were prepared by a complex method based on the Pechini type reaction route and mechanically assisted synthesis. In both ways BaTiO3 ceramics were sintered after 120 min on 1300 degrees C without pre-calcination steps. The crystal structure was investigated by the XRD, IR and Raman spectroscopy. The particle size and morphology of BaTiO3 were examined by XRD and SEM. The XRD results of powders indicate the formation of cubic phase of BaTiO3. It can be observed that in the case of Pechini process BaTiO3 powder is well crystallized but in the case of mechanochemistry process, significant amount of amorphous phase was detected. The sintered BaTiO3 ceramic sample prepared by Pechini process, shows the formation of tetragonal phase. However, IR and Raman spectrum showed a mixture of cubic and tetragonal for BaTiO3 obtained by Pechini process and tetragonal for BaTiO3 obtained by mechanically assisted synthesis.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Journal of the European Ceramic Society",
title = "The characterization of the barium titanate ceramic powders prepared by the Pechini type reaction route and mechanically assisted synthesis",
pages = "628-623",
number = "2",
volume = "30",
doi = "10.1016/j.jeurceramsoc.2009.08.011"
}

Lazarević, Z. Z., Vijatović Petrović, M., Dohcević-Mitrović, Z., Romčević, N., Romčević, M., Paunović, N.,& Stojanović, B. D.. (2010). The characterization of the barium titanate ceramic powders prepared by the Pechini type reaction route and mechanically assisted synthesis. in Journal of the European Ceramic Society
Elsevier Sci Ltd, Oxford., 30(2), 623-628.
https://doi.org/10.1016/j.jeurceramsoc.2009.08.011

Lazarević ZZ, Vijatović Petrović M, Dohcević-Mitrović Z, Romčević N, Romčević M, Paunović N, Stojanović BD. The characterization of the barium titanate ceramic powders prepared by the Pechini type reaction route and mechanically assisted synthesis. in Journal of the European Ceramic Society. 2010;30(2):623-628.
doi:10.1016/j.jeurceramsoc.2009.08.011 .

Lazarević, Zorica Z, Vijatović Petrović, Mirjana, Dohcević-Mitrović, Zorana, Romčević, Nebojša, Romčević, Maja, Paunović, Novica, Stojanović, Biljana D, "The characterization of the barium titanate ceramic powders prepared by the Pechini type reaction route and mechanically assisted synthesis" in Journal of the European Ceramic Society, 30, no. 2 (2010):623-628,
https://doi.org/10.1016/j.jeurceramsoc.2009.08.011 . .

TY  - JOUR
AU  - Lazarević, Zorica Z
AU  - Romčević, Nebojša
AU  - Vijatović Petrović, Mirjana
AU  - Paunović, Novica
AU  - Romčević, Maja
AU  - Stojanović, Biljana D
AU  - Dohcević-Mitrović, Zorana
PY  - 2009
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/345
AB  - Barium titanate, BaTiO3 ceramic powders were prepared by mechanochemical synthesis and by the Pechini method. A powder mixture of BaO and TiO2 was treated in a planetary ball mill in an air atmosphere for Lip to 1 h, using zirconium oxide vial and zirconium oxide balls as the milling medium. After 60 min BaTiO3 phase was formed. In both ways BaTiO3 ceramics were sintered after 2 h on 1300 degrees C without pre-calcinations step. The heating rate was 10 degrees C min(-1). The formation of phase and crystal structure of BaTiO3 was approved by X-ray diffraction analysis and the Raman spectroscopy. The morphology and microstructure of obtained powders were examined by scanning electron microscopy method. Sharp phase transition from ferroelectric to paraelectric state was observed. The hysteresis loop is very well performed with regular sharp characteristic of ferroelectric materials.
PB  - Polish Acad Sciences Inst Physics, Warsaw
T2  - Acta Physica Polonica A
T1  - Characterization of Barium Titanate Ceramic Powders by Raman Spectroscopy
EP  - 810
IS  - 4
SP  - 808
VL  - 115
DO  - 10.12693/APhysPolA.115.808
ER  - 

@article{
author = "Lazarević, Zorica Z and Romčević, Nebojša and Vijatović Petrović, Mirjana and Paunović, Novica and Romčević, Maja and Stojanović, Biljana D and Dohcević-Mitrović, Zorana",
year = "2009",
abstract = "Barium titanate, BaTiO3 ceramic powders were prepared by mechanochemical synthesis and by the Pechini method. A powder mixture of BaO and TiO2 was treated in a planetary ball mill in an air atmosphere for Lip to 1 h, using zirconium oxide vial and zirconium oxide balls as the milling medium. After 60 min BaTiO3 phase was formed. In both ways BaTiO3 ceramics were sintered after 2 h on 1300 degrees C without pre-calcinations step. The heating rate was 10 degrees C min(-1). The formation of phase and crystal structure of BaTiO3 was approved by X-ray diffraction analysis and the Raman spectroscopy. The morphology and microstructure of obtained powders were examined by scanning electron microscopy method. Sharp phase transition from ferroelectric to paraelectric state was observed. The hysteresis loop is very well performed with regular sharp characteristic of ferroelectric materials.",
publisher = "Polish Acad Sciences Inst Physics, Warsaw",
journal = "Acta Physica Polonica A",
title = "Characterization of Barium Titanate Ceramic Powders by Raman Spectroscopy",
pages = "810-808",
number = "4",
volume = "115",
doi = "10.12693/APhysPolA.115.808"
}

Lazarević, Z. Z., Romčević, N., Vijatović Petrović, M., Paunović, N., Romčević, M., Stojanović, B. D.,& Dohcević-Mitrović, Z.. (2009). Characterization of Barium Titanate Ceramic Powders by Raman Spectroscopy. in Acta Physica Polonica A
Polish Acad Sciences Inst Physics, Warsaw., 115(4), 808-810.
https://doi.org/10.12693/APhysPolA.115.808

Lazarević ZZ, Romčević N, Vijatović Petrović M, Paunović N, Romčević M, Stojanović BD, Dohcević-Mitrović Z. Characterization of Barium Titanate Ceramic Powders by Raman Spectroscopy. in Acta Physica Polonica A. 2009;115(4):808-810.
doi:10.12693/APhysPolA.115.808 .

Lazarević, Zorica Z, Romčević, Nebojša, Vijatović Petrović, Mirjana, Paunović, Novica, Romčević, Maja, Stojanović, Biljana D, Dohcević-Mitrović, Zorana, "Characterization of Barium Titanate Ceramic Powders by Raman Spectroscopy" in Acta Physica Polonica A, 115, no. 4 (2009):808-810,
https://doi.org/10.12693/APhysPolA.115.808 . .

TY  - JOUR
AU  - Lazarević, Zorica Z
AU  - Bobić, Jelena
AU  - Romčević, Nebojša
AU  - Paunović, Novica
AU  - Stojanović, Biljana D
PY  - 2009
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/305
AB  - Barium-bismuth titanate, BaBi4Ti4O15 (BBT), a member of Aurivillius bismuth-based layer-structure perovskites, was prepared from stoichiometric amounts of barium titanate and bismuth titanate obtained via mechanochemical synthesis. Mechanochemical synthesis was performed in air atmosphere in a planetary ball mill. The reaction mechanism of BaBi4Ti4O15 and the preparation and characteristics of BBT ceramic powders were studied using XRD, Raman spectroscopy, particle analysis and SEM. The Bi-layered perovskite structure Of BaBi4Ti4O15 ceramic forms at 1100 degrees C for 4 h without a pre-calcination step. The microstructure of BaBi4Ti4O15 exhibits plate-like grains typical for the Bi-layered structured material and spherical and polygonal grains. The Ba2+ addition leads to changes in the microstructure development, particularly in the change of the average grain size.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Study of Barium Bismuth Titanate Prepared by Mechanochemical Synthesis
EP  - 335
IS  - 3
SP  - 329
VL  - 41
DO  - 10.2298/SOS0903329L
ER  - 

@article{
author = "Lazarević, Zorica Z and Bobić, Jelena and Romčević, Nebojša and Paunović, Novica and Stojanović, Biljana D",
year = "2009",
abstract = "Barium-bismuth titanate, BaBi4Ti4O15 (BBT), a member of Aurivillius bismuth-based layer-structure perovskites, was prepared from stoichiometric amounts of barium titanate and bismuth titanate obtained via mechanochemical synthesis. Mechanochemical synthesis was performed in air atmosphere in a planetary ball mill. The reaction mechanism of BaBi4Ti4O15 and the preparation and characteristics of BBT ceramic powders were studied using XRD, Raman spectroscopy, particle analysis and SEM. The Bi-layered perovskite structure Of BaBi4Ti4O15 ceramic forms at 1100 degrees C for 4 h without a pre-calcination step. The microstructure of BaBi4Ti4O15 exhibits plate-like grains typical for the Bi-layered structured material and spherical and polygonal grains. The Ba2+ addition leads to changes in the microstructure development, particularly in the change of the average grain size.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Study of Barium Bismuth Titanate Prepared by Mechanochemical Synthesis",
pages = "335-329",
number = "3",
volume = "41",
doi = "10.2298/SOS0903329L"
}

Lazarević, Z. Z., Bobić, J., Romčević, N., Paunović, N.,& Stojanović, B. D.. (2009). Study of Barium Bismuth Titanate Prepared by Mechanochemical Synthesis. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 41(3), 329-335.
https://doi.org/10.2298/SOS0903329L

Lazarević ZZ, Bobić J, Romčević N, Paunović N, Stojanović BD. Study of Barium Bismuth Titanate Prepared by Mechanochemical Synthesis. in Science of Sintering. 2009;41(3):329-335.
doi:10.2298/SOS0903329L .

Lazarević, Zorica Z, Bobić, Jelena, Romčević, Nebojša, Paunović, Novica, Stojanović, Biljana D, "Study of Barium Bismuth Titanate Prepared by Mechanochemical Synthesis" in Science of Sintering, 41, no. 3 (2009):329-335,
https://doi.org/10.2298/SOS0903329L . .