TY  - JOUR
AU  - Vijatović Petrović, Mirjana
AU  - Vasić, Miloš
AU  - Bobić, Jelena
AU  - Živković, Ljiljana
AU  - Stojanović, Biljana D
PY  - 2008
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/2187
AB  - Barium titanate (BaTiO3) has been of practical interest for more than 60 years because of its attractive properties.
BaTiO3 can be prepared using different methods, which can have signifi cant infl uence on the structure and
properties of barium titanate ceramics.
In this paper powder of BaTiO3 powders were prepared by two methods. The fi rst was synthesis from polymeric
precursors through Pechini process which was carried out as a three-stage process from an oganometallic
complex, producing cubic BaTiO3 powders with 40–80 nm primary particles. The second was a mechanochemical
synthesis from powder mixture of BaO and TiO2, producing cubic BaTiO3 but with primary particles
200–250 nm. In both cases BaTiO3 ceramics were produced by sintering for 2h at 1300°C without a pre-calcination
step. The phases formed and the crystal structure of BaTiO3 prepared by both methods was carried
out by XRD analysis. The morphology and microstructure of obtained powders and sintered samples were
examined by SEM.
T2  - Processing and Application of Ceramics
T1  - Effect of powder synthesis method on BaTiO3 ceramics
EP  - 31
IS  - 1
SP  - 27
VL  - 2
DO  - 10.2298/PAC0801027V
ER  - 

@article{
author = "Vijatović Petrović, Mirjana and Vasić, Miloš and Bobić, Jelena and Živković, Ljiljana and Stojanović, Biljana D",
year = "2008",
abstract = "Barium titanate (BaTiO3) has been of practical interest for more than 60 years because of its attractive properties.
BaTiO3 can be prepared using different methods, which can have signifi cant infl uence on the structure and
properties of barium titanate ceramics.
In this paper powder of BaTiO3 powders were prepared by two methods. The fi rst was synthesis from polymeric
precursors through Pechini process which was carried out as a three-stage process from an oganometallic
complex, producing cubic BaTiO3 powders with 40–80 nm primary particles. The second was a mechanochemical
synthesis from powder mixture of BaO and TiO2, producing cubic BaTiO3 but with primary particles
200–250 nm. In both cases BaTiO3 ceramics were produced by sintering for 2h at 1300°C without a pre-calcination
step. The phases formed and the crystal structure of BaTiO3 prepared by both methods was carried
out by XRD analysis. The morphology and microstructure of obtained powders and sintered samples were
examined by SEM.",
journal = "Processing and Application of Ceramics",
title = "Effect of powder synthesis method on BaTiO3 ceramics",
pages = "31-27",
number = "1",
volume = "2",
doi = "10.2298/PAC0801027V"
}

Vijatović Petrović, M., Vasić, M., Bobić, J., Živković, L.,& Stojanović, B. D.. (2008). Effect of powder synthesis method on BaTiO3 ceramics. in Processing and Application of Ceramics, 2(1), 27-31.
https://doi.org/10.2298/PAC0801027V

Vijatović Petrović M, Vasić M, Bobić J, Živković L, Stojanović BD. Effect of powder synthesis method on BaTiO3 ceramics. in Processing and Application of Ceramics. 2008;2(1):27-31.
doi:10.2298/PAC0801027V .

Vijatović Petrović, Mirjana, Vasić, Miloš, Bobić, Jelena, Živković, Ljiljana, Stojanović, Biljana D, "Effect of powder synthesis method on BaTiO3 ceramics" in Processing and Application of Ceramics, 2, no. 1 (2008):27-31,
https://doi.org/10.2298/PAC0801027V . .