TY  - JOUR
AU  - Krstajic-Pajic, M. N.
AU  - Stevanović, Sanja I.
AU  - Radmilović, Velimir R
AU  - Gavrilovic-Wohlmuther, Aleksandra
AU  - Zabinski, P.
AU  - Elezović, Nevenka R.
AU  - Radmilović, Vuk V.
AU  - Gojković, Snežana Lj
AU  - Jovanović, V. M.
PY  - 2019
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1218
AB  - Low loading PtAu nanoparticles supported on high area carbon were synthesized by water-in-oil microemulsion method and examined for formic acid and methanol oxidation. Prepared catalyst powder was characterized by Xray diffraction (XRD), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS). These techniques revealed that the catalyst contains rather agglomerated quasi-spherical particles, similar to 4 nm diameter, composed of a solid solution of Pt and Au with only similar to 4 at% of Au. In spite of such low Au content, both onset and peak potentials for CO oxidation are shifted some 150 mV to more positive values in comparison to Pt synthesized in the same manner due to stronger binding of CO as a result of notable electronic effect. It is important that this small quantity of Au also significantly influences oxidation of formic acid promoting direct path and suppressing indirect path in formic acid oxidation in a degree as expected by a much larger quantity of Au. Such improvement could be due exclusively by ensemble effect of high number of small Pt domains which formation could be possible only by very fine dispersion of such low Au quantity. High number of small Pt domains is corroborated by lower activity for methanol oxidation in comparison to Pt catalyst synthesized by the same procedure. These results emphasize the importance of the Au dispersion on the surface of Pt over its quantity in PtAu catalyst with regards to both, the ensemble and the electronic effects.
PB  - Elsevier Science Bv, Amsterdam
T2  - Applied Catalysis B-Environmental
T1  - Dispersion effect in formic acid oxidation on PtAu/C nanocatalyst prepared by water-in-oil microemulsion method
EP  - 593
SP  - 585
VL  - 243
DO  - 10.1016/j.apcatb.2018.10.064
ER  - 

@article{
author = "Krstajic-Pajic, M. N. and Stevanović, Sanja I. and Radmilović, Velimir R and Gavrilovic-Wohlmuther, Aleksandra and Zabinski, P. and Elezović, Nevenka R. and Radmilović, Vuk V. and Gojković, Snežana Lj and Jovanović, V. M.",
year = "2019",
abstract = "Low loading PtAu nanoparticles supported on high area carbon were synthesized by water-in-oil microemulsion method and examined for formic acid and methanol oxidation. Prepared catalyst powder was characterized by Xray diffraction (XRD), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS). These techniques revealed that the catalyst contains rather agglomerated quasi-spherical particles, similar to 4 nm diameter, composed of a solid solution of Pt and Au with only similar to 4 at% of Au. In spite of such low Au content, both onset and peak potentials for CO oxidation are shifted some 150 mV to more positive values in comparison to Pt synthesized in the same manner due to stronger binding of CO as a result of notable electronic effect. It is important that this small quantity of Au also significantly influences oxidation of formic acid promoting direct path and suppressing indirect path in formic acid oxidation in a degree as expected by a much larger quantity of Au. Such improvement could be due exclusively by ensemble effect of high number of small Pt domains which formation could be possible only by very fine dispersion of such low Au quantity. High number of small Pt domains is corroborated by lower activity for methanol oxidation in comparison to Pt catalyst synthesized by the same procedure. These results emphasize the importance of the Au dispersion on the surface of Pt over its quantity in PtAu catalyst with regards to both, the ensemble and the electronic effects.",
publisher = "Elsevier Science Bv, Amsterdam",
journal = "Applied Catalysis B-Environmental",
title = "Dispersion effect in formic acid oxidation on PtAu/C nanocatalyst prepared by water-in-oil microemulsion method",
pages = "593-585",
volume = "243",
doi = "10.1016/j.apcatb.2018.10.064"
}

Krstajic-Pajic, M. N., Stevanović, S. I., Radmilović, V. R., Gavrilovic-Wohlmuther, A., Zabinski, P., Elezović, N. R., Radmilović, V. V., Gojković, S. L.,& Jovanović, V. M.. (2019). Dispersion effect in formic acid oxidation on PtAu/C nanocatalyst prepared by water-in-oil microemulsion method. in Applied Catalysis B-Environmental
Elsevier Science Bv, Amsterdam., 243, 585-593.
https://doi.org/10.1016/j.apcatb.2018.10.064

Krstajic-Pajic MN, Stevanović SI, Radmilović VR, Gavrilovic-Wohlmuther A, Zabinski P, Elezović NR, Radmilović VV, Gojković SL, Jovanović VM. Dispersion effect in formic acid oxidation on PtAu/C nanocatalyst prepared by water-in-oil microemulsion method. in Applied Catalysis B-Environmental. 2019;243:585-593.
doi:10.1016/j.apcatb.2018.10.064 .

Krstajic-Pajic, M. N., Stevanović, Sanja I., Radmilović, Velimir R, Gavrilovic-Wohlmuther, Aleksandra, Zabinski, P., Elezović, Nevenka R., Radmilović, Vuk V., Gojković, Snežana Lj, Jovanović, V. M., "Dispersion effect in formic acid oxidation on PtAu/C nanocatalyst prepared by water-in-oil microemulsion method" in Applied Catalysis B-Environmental, 243 (2019):585-593,
https://doi.org/10.1016/j.apcatb.2018.10.064 . .

TY  - JOUR
AU  - Tripković, D.
AU  - Stevanović, Sanja I.
AU  - Gavrilović, A.
AU  - Rogan, Jelena
AU  - Lačnjevac, Uroš
AU  - Kravić, T.
AU  - Jovanović, V. M.
PY  - 2018
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1118
AB  - In our previous paper, we described in detail studies of Sn influence on electrocatalytic activity of PtSn catalyst for CO and formic acid oxidation (StevanoviAc et al., J. Phys. Chem. C, 118 (2014) 278-289). The catalyst was composed of a Pt phase, Pt3Sn alloy and very small SnO2 particles. Different electrochemical treatment enabled studies of PtSn/C having Sn both in surface and subsurface layers and skeleton structure of this catalyst with Sn only in subsurface layers. The results obtained revealed the promotional effect of surface Sn whether alloyed or as oxide above all in preventing accumulation of CO and blocking the surface Pt atoms. As a consequence, in formic acid oxidation, the currents are not entering the plateau but increasing constantly until reaching a maximum. It was concluded that at lower potentials the effect of Sn on formic acid oxidation was predominantly electronic but with increasing the potential bi-functional mechanism prevailed due to the leading role of SnO2. This role of SnO2 is restated in the present study. Therefore, CO and formic acid oxidation were examined at PtSnO2/C catalyst. The catalyst was synthesised by the same microwave-assisted polyol procedure. According to XRD analysis, the catalyst is composed of a Pt phase and SnO2 phase. The reactions were examined on PtSnO2/C catalyst treated on the same way as PtSn/C. Comparing the results obtained, the role of SnO2 is confirmed and at the same time the significance of alloyed Sn and its electronic effect is revealed.
PB  - Springer, New York
T2  - Electrocatalysis
T1  - The Role of SnO2 on Electrocatalytic Activity of PtSn Catalysts
EP  - 85
IS  - 1
SP  - 76
VL  - 9
DO  - 10.1007/s12678-017-0424-4
ER  - 

@article{
author = "Tripković, D. and Stevanović, Sanja I. and Gavrilović, A. and Rogan, Jelena and Lačnjevac, Uroš and Kravić, T. and Jovanović, V. M.",
year = "2018",
abstract = "In our previous paper, we described in detail studies of Sn influence on electrocatalytic activity of PtSn catalyst for CO and formic acid oxidation (StevanoviAc et al., J. Phys. Chem. C, 118 (2014) 278-289). The catalyst was composed of a Pt phase, Pt3Sn alloy and very small SnO2 particles. Different electrochemical treatment enabled studies of PtSn/C having Sn both in surface and subsurface layers and skeleton structure of this catalyst with Sn only in subsurface layers. The results obtained revealed the promotional effect of surface Sn whether alloyed or as oxide above all in preventing accumulation of CO and blocking the surface Pt atoms. As a consequence, in formic acid oxidation, the currents are not entering the plateau but increasing constantly until reaching a maximum. It was concluded that at lower potentials the effect of Sn on formic acid oxidation was predominantly electronic but with increasing the potential bi-functional mechanism prevailed due to the leading role of SnO2. This role of SnO2 is restated in the present study. Therefore, CO and formic acid oxidation were examined at PtSnO2/C catalyst. The catalyst was synthesised by the same microwave-assisted polyol procedure. According to XRD analysis, the catalyst is composed of a Pt phase and SnO2 phase. The reactions were examined on PtSnO2/C catalyst treated on the same way as PtSn/C. Comparing the results obtained, the role of SnO2 is confirmed and at the same time the significance of alloyed Sn and its electronic effect is revealed.",
publisher = "Springer, New York",
journal = "Electrocatalysis",
title = "The Role of SnO2 on Electrocatalytic Activity of PtSn Catalysts",
pages = "85-76",
number = "1",
volume = "9",
doi = "10.1007/s12678-017-0424-4"
}

Tripković, D., Stevanović, S. I., Gavrilović, A., Rogan, J., Lačnjevac, U., Kravić, T.,& Jovanović, V. M.. (2018). The Role of SnO2 on Electrocatalytic Activity of PtSn Catalysts. in Electrocatalysis
Springer, New York., 9(1), 76-85.
https://doi.org/10.1007/s12678-017-0424-4

Tripković D, Stevanović SI, Gavrilović A, Rogan J, Lačnjevac U, Kravić T, Jovanović VM. The Role of SnO2 on Electrocatalytic Activity of PtSn Catalysts. in Electrocatalysis. 2018;9(1):76-85.
doi:10.1007/s12678-017-0424-4 .

Tripković, D., Stevanović, Sanja I., Gavrilović, A., Rogan, Jelena, Lačnjevac, Uroš, Kravić, T., Jovanović, V. M., "The Role of SnO2 on Electrocatalytic Activity of PtSn Catalysts" in Electrocatalysis, 9, no. 1 (2018):76-85,
https://doi.org/10.1007/s12678-017-0424-4 . .