TY  - JOUR
AU  - Gilic, M.
AU  - Kostic, R.
AU  - Stojanović, D.
AU  - Romčević, Maja
AU  - Hadzic, B.
AU  - Petrović, M.
AU  - Ralević, U.
AU  - Lazarević, Zorica Z
AU  - Trajic, J.
AU  - Ristic-Djurović, J.
AU  - Ćirković, Jovana
AU  - Romčević, Nebojša
PY  - 2018
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1151
AB  - In this paper we present photoluminescence measurements of CdSe nanoparticles embedded in transparent glass. Sample is prepared using an original technique, which combines both heat treatment and ultraviolet laser irradiation. Photoluminescence spectra displayed one main emission band at 2.14 eV. We identify this bands energy as basic interband transition in CdSe nanoparticle. We calculated energy of basic (1s(h)-1s(e)) transition in spherical CdSe quantum dot (QD), within infinite potential barrier, in effective-mass approximation. On the basis of this model, average radius of synthesized CdSe QDs is about 3 nm, which is in consistence with AFM measurements and UV-VIS absorption measurements.
PB  - Springer, Dordrecht
T2  - Optical and Quantum Electronics
T1  - Photoluminescence spectroscopy of CdSe nanoparticles embedded in transparent glass
IS  - 7
VL  - 50
DO  - 10.1007/s11082-018-1552-7
ER  - 

@article{
author = "Gilic, M. and Kostic, R. and Stojanović, D. and Romčević, Maja and Hadzic, B. and Petrović, M. and Ralević, U. and Lazarević, Zorica Z and Trajic, J. and Ristic-Djurović, J. and Ćirković, Jovana and Romčević, Nebojša",
year = "2018",
abstract = "In this paper we present photoluminescence measurements of CdSe nanoparticles embedded in transparent glass. Sample is prepared using an original technique, which combines both heat treatment and ultraviolet laser irradiation. Photoluminescence spectra displayed one main emission band at 2.14 eV. We identify this bands energy as basic interband transition in CdSe nanoparticle. We calculated energy of basic (1s(h)-1s(e)) transition in spherical CdSe quantum dot (QD), within infinite potential barrier, in effective-mass approximation. On the basis of this model, average radius of synthesized CdSe QDs is about 3 nm, which is in consistence with AFM measurements and UV-VIS absorption measurements.",
publisher = "Springer, Dordrecht",
journal = "Optical and Quantum Electronics",
title = "Photoluminescence spectroscopy of CdSe nanoparticles embedded in transparent glass",
number = "7",
volume = "50",
doi = "10.1007/s11082-018-1552-7"
}

Gilic, M., Kostic, R., Stojanović, D., Romčević, M., Hadzic, B., Petrović, M., Ralević, U., Lazarević, Z. Z., Trajic, J., Ristic-Djurović, J., Ćirković, J.,& Romčević, N.. (2018). Photoluminescence spectroscopy of CdSe nanoparticles embedded in transparent glass. in Optical and Quantum Electronics
Springer, Dordrecht., 50(7).
https://doi.org/10.1007/s11082-018-1552-7

Gilic M, Kostic R, Stojanović D, Romčević M, Hadzic B, Petrović M, Ralević U, Lazarević ZZ, Trajic J, Ristic-Djurović J, Ćirković J, Romčević N. Photoluminescence spectroscopy of CdSe nanoparticles embedded in transparent glass. in Optical and Quantum Electronics. 2018;50(7).
doi:10.1007/s11082-018-1552-7 .

Gilic, M., Kostic, R., Stojanović, D., Romčević, Maja, Hadzic, B., Petrović, M., Ralević, U., Lazarević, Zorica Z, Trajic, J., Ristic-Djurović, J., Ćirković, Jovana, Romčević, Nebojša, "Photoluminescence spectroscopy of CdSe nanoparticles embedded in transparent glass" in Optical and Quantum Electronics, 50, no. 7 (2018),
https://doi.org/10.1007/s11082-018-1552-7 . .

TY  - JOUR
AU  - Lazarević, Zorica Z
AU  - Vijatović Petrović, Mirjana
AU  - Dohcević-Mitrović, Zorana
AU  - Romčević, Nebojša
AU  - Romčević, Maja
AU  - Paunović, Novica
AU  - Stojanović, Biljana D
PY  - 2010
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/419
AB  - BaTiO3 ceramic powders were prepared by a complex method based on the Pechini type reaction route and mechanically assisted synthesis. In both ways BaTiO3 ceramics were sintered after 120 min on 1300 degrees C without pre-calcination steps. The crystal structure was investigated by the XRD, IR and Raman spectroscopy. The particle size and morphology of BaTiO3 were examined by XRD and SEM. The XRD results of powders indicate the formation of cubic phase of BaTiO3. It can be observed that in the case of Pechini process BaTiO3 powder is well crystallized but in the case of mechanochemistry process, significant amount of amorphous phase was detected. The sintered BaTiO3 ceramic sample prepared by Pechini process, shows the formation of tetragonal phase. However, IR and Raman spectrum showed a mixture of cubic and tetragonal for BaTiO3 obtained by Pechini process and tetragonal for BaTiO3 obtained by mechanically assisted synthesis.
PB  - Elsevier Sci Ltd, Oxford
T2  - Journal of the European Ceramic Society
T1  - The characterization of the barium titanate ceramic powders prepared by the Pechini type reaction route and mechanically assisted synthesis
EP  - 628
IS  - 2
SP  - 623
VL  - 30
DO  - 10.1016/j.jeurceramsoc.2009.08.011
ER  - 

@article{
author = "Lazarević, Zorica Z and Vijatović Petrović, Mirjana and Dohcević-Mitrović, Zorana and Romčević, Nebojša and Romčević, Maja and Paunović, Novica and Stojanović, Biljana D",
year = "2010",
abstract = "BaTiO3 ceramic powders were prepared by a complex method based on the Pechini type reaction route and mechanically assisted synthesis. In both ways BaTiO3 ceramics were sintered after 120 min on 1300 degrees C without pre-calcination steps. The crystal structure was investigated by the XRD, IR and Raman spectroscopy. The particle size and morphology of BaTiO3 were examined by XRD and SEM. The XRD results of powders indicate the formation of cubic phase of BaTiO3. It can be observed that in the case of Pechini process BaTiO3 powder is well crystallized but in the case of mechanochemistry process, significant amount of amorphous phase was detected. The sintered BaTiO3 ceramic sample prepared by Pechini process, shows the formation of tetragonal phase. However, IR and Raman spectrum showed a mixture of cubic and tetragonal for BaTiO3 obtained by Pechini process and tetragonal for BaTiO3 obtained by mechanically assisted synthesis.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Journal of the European Ceramic Society",
title = "The characterization of the barium titanate ceramic powders prepared by the Pechini type reaction route and mechanically assisted synthesis",
pages = "628-623",
number = "2",
volume = "30",
doi = "10.1016/j.jeurceramsoc.2009.08.011"
}

Lazarević, Z. Z., Vijatović Petrović, M., Dohcević-Mitrović, Z., Romčević, N., Romčević, M., Paunović, N.,& Stojanović, B. D.. (2010). The characterization of the barium titanate ceramic powders prepared by the Pechini type reaction route and mechanically assisted synthesis. in Journal of the European Ceramic Society
Elsevier Sci Ltd, Oxford., 30(2), 623-628.
https://doi.org/10.1016/j.jeurceramsoc.2009.08.011

Lazarević ZZ, Vijatović Petrović M, Dohcević-Mitrović Z, Romčević N, Romčević M, Paunović N, Stojanović BD. The characterization of the barium titanate ceramic powders prepared by the Pechini type reaction route and mechanically assisted synthesis. in Journal of the European Ceramic Society. 2010;30(2):623-628.
doi:10.1016/j.jeurceramsoc.2009.08.011 .

Lazarević, Zorica Z, Vijatović Petrović, Mirjana, Dohcević-Mitrović, Zorana, Romčević, Nebojša, Romčević, Maja, Paunović, Novica, Stojanović, Biljana D, "The characterization of the barium titanate ceramic powders prepared by the Pechini type reaction route and mechanically assisted synthesis" in Journal of the European Ceramic Society, 30, no. 2 (2010):623-628,
https://doi.org/10.1016/j.jeurceramsoc.2009.08.011 . .

TY  - JOUR
AU  - Lazarević, Zorica Z
AU  - Vijatović Petrović, Mirjana
AU  - Stojanović, Biljana D
AU  - Romčević, Maja
AU  - Romčević, Nebojša
PY  - 2010
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/409
AB  - Lanthanum and antimony doped barium titanate powders were prepared by polymeric precursors method through Pechini process. Obtained powder was pressed into pellet and sintering was performed at 1300 degrees C for 8 h. The formation of phase and crystal structure of BaTiO3 was carried out by XRD analysis, Raman and IR spectroscopy. Microstructure properties such as grain size distribution and morphology of sintered samples were determined using scanning electron microscope. Therefore, it was analyzed relation between grain size, structure and properties of obtained ceramics. Influence of La- and Sb-doping on barium titanate properties was discussed. Crown
PB  - Elsevier Science Sa, Lausanne
T2  - Journal of Alloys and Compounds
T1  - Structure study of nanosized La- and Sb-doped BaTiO3
EP  - 475
IS  - 1-2
SP  - 472
VL  - 494
DO  - 10.1016/j.jallcom.2010.01.088
ER  - 

@article{
author = "Lazarević, Zorica Z and Vijatović Petrović, Mirjana and Stojanović, Biljana D and Romčević, Maja and Romčević, Nebojša",
year = "2010",
abstract = "Lanthanum and antimony doped barium titanate powders were prepared by polymeric precursors method through Pechini process. Obtained powder was pressed into pellet and sintering was performed at 1300 degrees C for 8 h. The formation of phase and crystal structure of BaTiO3 was carried out by XRD analysis, Raman and IR spectroscopy. Microstructure properties such as grain size distribution and morphology of sintered samples were determined using scanning electron microscope. Therefore, it was analyzed relation between grain size, structure and properties of obtained ceramics. Influence of La- and Sb-doping on barium titanate properties was discussed. Crown",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Journal of Alloys and Compounds",
title = "Structure study of nanosized La- and Sb-doped BaTiO3",
pages = "475-472",
number = "1-2",
volume = "494",
doi = "10.1016/j.jallcom.2010.01.088"
}

Lazarević, Z. Z., Vijatović Petrović, M., Stojanović, B. D., Romčević, M.,& Romčević, N.. (2010). Structure study of nanosized La- and Sb-doped BaTiO3. in Journal of Alloys and Compounds
Elsevier Science Sa, Lausanne., 494(1-2), 472-475.
https://doi.org/10.1016/j.jallcom.2010.01.088

Lazarević ZZ, Vijatović Petrović M, Stojanović BD, Romčević M, Romčević N. Structure study of nanosized La- and Sb-doped BaTiO3. in Journal of Alloys and Compounds. 2010;494(1-2):472-475.
doi:10.1016/j.jallcom.2010.01.088 .

Lazarević, Zorica Z, Vijatović Petrović, Mirjana, Stojanović, Biljana D, Romčević, Maja, Romčević, Nebojša, "Structure study of nanosized La- and Sb-doped BaTiO3" in Journal of Alloys and Compounds, 494, no. 1-2 (2010):472-475,
https://doi.org/10.1016/j.jallcom.2010.01.088 . .

TY  - JOUR
AU  - Lazarević, Zorica Z
AU  - Romčević, Nebojša
AU  - Romčević, Maja
AU  - Trajic, Jelena M
AU  - Vijatović Petrović, Mirjana
AU  - Bobić, Jelena
AU  - Stojanović, Biljana D
PY  - 2010
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/407
AB  - Pure and antimony doped barium titanate powders were prepared by polymeric precursors method through Pechini process, which was carried out as a three-stage process from organometallic complex. Obtained powder was pressed into pellets and sintering was performed at 1300 degrees C for 8 h with heating rate of 10 degrees C min(-1). The formation of phase and crystal structure of pure and Sb-doped barium titanate was approved by XRD analysis, Raman and IR spectroscopy. The influence of Sb doping on microstructure of barium titanate ceramics was investigated by scanning electron microscopy. Therefore, the relation between grain size, structure and properties of the obtained ceramics was analyzed. Influence of Sb doping on barium titanate properties was discussed.
PB  - World Scientific Publ Co Pte Ltd, Singapore
T2  - International Journal of Modern Physics B
T1  - Infrared and Raman spectroscopy study of antimony doped barium titanate prepared from organometallic complex
EP  - 681
IS  - 6-7
SP  - 676
VL  - 24
DO  - 10.1142/S0217979210064290
ER  - 

@article{
author = "Lazarević, Zorica Z and Romčević, Nebojša and Romčević, Maja and Trajic, Jelena M and Vijatović Petrović, Mirjana and Bobić, Jelena and Stojanović, Biljana D",
year = "2010",
abstract = "Pure and antimony doped barium titanate powders were prepared by polymeric precursors method through Pechini process, which was carried out as a three-stage process from organometallic complex. Obtained powder was pressed into pellets and sintering was performed at 1300 degrees C for 8 h with heating rate of 10 degrees C min(-1). The formation of phase and crystal structure of pure and Sb-doped barium titanate was approved by XRD analysis, Raman and IR spectroscopy. The influence of Sb doping on microstructure of barium titanate ceramics was investigated by scanning electron microscopy. Therefore, the relation between grain size, structure and properties of the obtained ceramics was analyzed. Influence of Sb doping on barium titanate properties was discussed.",
publisher = "World Scientific Publ Co Pte Ltd, Singapore",
journal = "International Journal of Modern Physics B",
title = "Infrared and Raman spectroscopy study of antimony doped barium titanate prepared from organometallic complex",
pages = "681-676",
number = "6-7",
volume = "24",
doi = "10.1142/S0217979210064290"
}

Lazarević, Z. Z., Romčević, N., Romčević, M., Trajic, J. M., Vijatović Petrović, M., Bobić, J.,& Stojanović, B. D.. (2010). Infrared and Raman spectroscopy study of antimony doped barium titanate prepared from organometallic complex. in International Journal of Modern Physics B
World Scientific Publ Co Pte Ltd, Singapore., 24(6-7), 676-681.
https://doi.org/10.1142/S0217979210064290

Lazarević ZZ, Romčević N, Romčević M, Trajic JM, Vijatović Petrović M, Bobić J, Stojanović BD. Infrared and Raman spectroscopy study of antimony doped barium titanate prepared from organometallic complex. in International Journal of Modern Physics B. 2010;24(6-7):676-681.
doi:10.1142/S0217979210064290 .

Lazarević, Zorica Z, Romčević, Nebojša, Romčević, Maja, Trajic, Jelena M, Vijatović Petrović, Mirjana, Bobić, Jelena, Stojanović, Biljana D, "Infrared and Raman spectroscopy study of antimony doped barium titanate prepared from organometallic complex" in International Journal of Modern Physics B, 24, no. 6-7 (2010):676-681,
https://doi.org/10.1142/S0217979210064290 . .

TY  - JOUR
AU  - Lazarević, Zorica Z
AU  - Romčević, Nebojša
AU  - Vijatović Petrović, Mirjana
AU  - Paunović, Novica
AU  - Romčević, Maja
AU  - Stojanović, Biljana D
AU  - Dohcević-Mitrović, Zorana
PY  - 2009
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/345
AB  - Barium titanate, BaTiO3 ceramic powders were prepared by mechanochemical synthesis and by the Pechini method. A powder mixture of BaO and TiO2 was treated in a planetary ball mill in an air atmosphere for Lip to 1 h, using zirconium oxide vial and zirconium oxide balls as the milling medium. After 60 min BaTiO3 phase was formed. In both ways BaTiO3 ceramics were sintered after 2 h on 1300 degrees C without pre-calcinations step. The heating rate was 10 degrees C min(-1). The formation of phase and crystal structure of BaTiO3 was approved by X-ray diffraction analysis and the Raman spectroscopy. The morphology and microstructure of obtained powders were examined by scanning electron microscopy method. Sharp phase transition from ferroelectric to paraelectric state was observed. The hysteresis loop is very well performed with regular sharp characteristic of ferroelectric materials.
PB  - Polish Acad Sciences Inst Physics, Warsaw
T2  - Acta Physica Polonica A
T1  - Characterization of Barium Titanate Ceramic Powders by Raman Spectroscopy
EP  - 810
IS  - 4
SP  - 808
VL  - 115
DO  - 10.12693/APhysPolA.115.808
ER  - 

@article{
author = "Lazarević, Zorica Z and Romčević, Nebojša and Vijatović Petrović, Mirjana and Paunović, Novica and Romčević, Maja and Stojanović, Biljana D and Dohcević-Mitrović, Zorana",
year = "2009",
abstract = "Barium titanate, BaTiO3 ceramic powders were prepared by mechanochemical synthesis and by the Pechini method. A powder mixture of BaO and TiO2 was treated in a planetary ball mill in an air atmosphere for Lip to 1 h, using zirconium oxide vial and zirconium oxide balls as the milling medium. After 60 min BaTiO3 phase was formed. In both ways BaTiO3 ceramics were sintered after 2 h on 1300 degrees C without pre-calcinations step. The heating rate was 10 degrees C min(-1). The formation of phase and crystal structure of BaTiO3 was approved by X-ray diffraction analysis and the Raman spectroscopy. The morphology and microstructure of obtained powders were examined by scanning electron microscopy method. Sharp phase transition from ferroelectric to paraelectric state was observed. The hysteresis loop is very well performed with regular sharp characteristic of ferroelectric materials.",
publisher = "Polish Acad Sciences Inst Physics, Warsaw",
journal = "Acta Physica Polonica A",
title = "Characterization of Barium Titanate Ceramic Powders by Raman Spectroscopy",
pages = "810-808",
number = "4",
volume = "115",
doi = "10.12693/APhysPolA.115.808"
}

Lazarević, Z. Z., Romčević, N., Vijatović Petrović, M., Paunović, N., Romčević, M., Stojanović, B. D.,& Dohcević-Mitrović, Z.. (2009). Characterization of Barium Titanate Ceramic Powders by Raman Spectroscopy. in Acta Physica Polonica A
Polish Acad Sciences Inst Physics, Warsaw., 115(4), 808-810.
https://doi.org/10.12693/APhysPolA.115.808

Lazarević ZZ, Romčević N, Vijatović Petrović M, Paunović N, Romčević M, Stojanović BD, Dohcević-Mitrović Z. Characterization of Barium Titanate Ceramic Powders by Raman Spectroscopy. in Acta Physica Polonica A. 2009;115(4):808-810.
doi:10.12693/APhysPolA.115.808 .

Lazarević, Zorica Z, Romčević, Nebojša, Vijatović Petrović, Mirjana, Paunović, Novica, Romčević, Maja, Stojanović, Biljana D, Dohcević-Mitrović, Zorana, "Characterization of Barium Titanate Ceramic Powders by Raman Spectroscopy" in Acta Physica Polonica A, 115, no. 4 (2009):808-810,
https://doi.org/10.12693/APhysPolA.115.808 . .

TY  - JOUR
AU  - Lazarević, Zorica Z
AU  - Romčević, Nebojša
AU  - Bobić, Jelena
AU  - Romčević, Maja
AU  - Dohcević-Mitrović, Zorana
AU  - Stojanović, Biljana D
PY  - 2009
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/324
AB  - Bi-layered structured ferroelectric materials-bismuth titanate, Bi4Ti3O12 (BIT) and barium-bismuth titanate, BaBi4Ti4O15 (BBT) powders were prepared by homogenization and sintering of mixture of stehiometric quantities of bismuth titanate and barium titanate obtained via mechanochemical synthesis. The Bi4Ti3O12 ceramic was obtained at 1000 degrees C for 4 h and BaBi4Ti4O15 ceramic at 1100 degrees C for 4 h. The phase formation and properties of Bi4Ti3O12 and BaBi4Ti4O15 were studied using XRD, Raman spectroscopy, EDS and SEM. Microstructure of Bi4Ti3O12 and BaBi4Ti4O15 exhibits plate-like grains typical for the bi-layered structured material. The Ba2+ addition leads to the change in the microstructure development, particularly in the change of the average grain size. Crown
PB  - Elsevier Science Sa, Lausanne
T2  - Journal of Alloys and Compounds
T1  - Study on bi-layered ceramics powders prepared by the mechanochemical synthesis
EP  - 852
IS  - 1-2
SP  - 848
VL  - 486
DO  - 10.1016/j.jallcom.2009.07.079
ER  - 

@article{
author = "Lazarević, Zorica Z and Romčević, Nebojša and Bobić, Jelena and Romčević, Maja and Dohcević-Mitrović, Zorana and Stojanović, Biljana D",
year = "2009",
abstract = "Bi-layered structured ferroelectric materials-bismuth titanate, Bi4Ti3O12 (BIT) and barium-bismuth titanate, BaBi4Ti4O15 (BBT) powders were prepared by homogenization and sintering of mixture of stehiometric quantities of bismuth titanate and barium titanate obtained via mechanochemical synthesis. The Bi4Ti3O12 ceramic was obtained at 1000 degrees C for 4 h and BaBi4Ti4O15 ceramic at 1100 degrees C for 4 h. The phase formation and properties of Bi4Ti3O12 and BaBi4Ti4O15 were studied using XRD, Raman spectroscopy, EDS and SEM. Microstructure of Bi4Ti3O12 and BaBi4Ti4O15 exhibits plate-like grains typical for the bi-layered structured material. The Ba2+ addition leads to the change in the microstructure development, particularly in the change of the average grain size. Crown",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Journal of Alloys and Compounds",
title = "Study on bi-layered ceramics powders prepared by the mechanochemical synthesis",
pages = "852-848",
number = "1-2",
volume = "486",
doi = "10.1016/j.jallcom.2009.07.079"
}

Lazarević, Z. Z., Romčević, N., Bobić, J., Romčević, M., Dohcević-Mitrović, Z.,& Stojanović, B. D.. (2009). Study on bi-layered ceramics powders prepared by the mechanochemical synthesis. in Journal of Alloys and Compounds
Elsevier Science Sa, Lausanne., 486(1-2), 848-852.
https://doi.org/10.1016/j.jallcom.2009.07.079

Lazarević ZZ, Romčević N, Bobić J, Romčević M, Dohcević-Mitrović Z, Stojanović BD. Study on bi-layered ceramics powders prepared by the mechanochemical synthesis. in Journal of Alloys and Compounds. 2009;486(1-2):848-852.
doi:10.1016/j.jallcom.2009.07.079 .

Lazarević, Zorica Z, Romčević, Nebojša, Bobić, Jelena, Romčević, Maja, Dohcević-Mitrović, Zorana, Stojanović, Biljana D, "Study on bi-layered ceramics powders prepared by the mechanochemical synthesis" in Journal of Alloys and Compounds, 486, no. 1-2 (2009):848-852,
https://doi.org/10.1016/j.jallcom.2009.07.079 . .

TY  - JOUR
AU  - Lazarević, Zorica Z
AU  - Bobić, Jelena
AU  - Romčević, Nebojša
AU  - Paunović, Novica
AU  - Stojanović, Biljana D
PY  - 2009
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/305
AB  - Barium-bismuth titanate, BaBi4Ti4O15 (BBT), a member of Aurivillius bismuth-based layer-structure perovskites, was prepared from stoichiometric amounts of barium titanate and bismuth titanate obtained via mechanochemical synthesis. Mechanochemical synthesis was performed in air atmosphere in a planetary ball mill. The reaction mechanism of BaBi4Ti4O15 and the preparation and characteristics of BBT ceramic powders were studied using XRD, Raman spectroscopy, particle analysis and SEM. The Bi-layered perovskite structure Of BaBi4Ti4O15 ceramic forms at 1100 degrees C for 4 h without a pre-calcination step. The microstructure of BaBi4Ti4O15 exhibits plate-like grains typical for the Bi-layered structured material and spherical and polygonal grains. The Ba2+ addition leads to changes in the microstructure development, particularly in the change of the average grain size.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Study of Barium Bismuth Titanate Prepared by Mechanochemical Synthesis
EP  - 335
IS  - 3
SP  - 329
VL  - 41
DO  - 10.2298/SOS0903329L
ER  - 

@article{
author = "Lazarević, Zorica Z and Bobić, Jelena and Romčević, Nebojša and Paunović, Novica and Stojanović, Biljana D",
year = "2009",
abstract = "Barium-bismuth titanate, BaBi4Ti4O15 (BBT), a member of Aurivillius bismuth-based layer-structure perovskites, was prepared from stoichiometric amounts of barium titanate and bismuth titanate obtained via mechanochemical synthesis. Mechanochemical synthesis was performed in air atmosphere in a planetary ball mill. The reaction mechanism of BaBi4Ti4O15 and the preparation and characteristics of BBT ceramic powders were studied using XRD, Raman spectroscopy, particle analysis and SEM. The Bi-layered perovskite structure Of BaBi4Ti4O15 ceramic forms at 1100 degrees C for 4 h without a pre-calcination step. The microstructure of BaBi4Ti4O15 exhibits plate-like grains typical for the Bi-layered structured material and spherical and polygonal grains. The Ba2+ addition leads to changes in the microstructure development, particularly in the change of the average grain size.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Study of Barium Bismuth Titanate Prepared by Mechanochemical Synthesis",
pages = "335-329",
number = "3",
volume = "41",
doi = "10.2298/SOS0903329L"
}

Lazarević, Z. Z., Bobić, J., Romčević, N., Paunović, N.,& Stojanović, B. D.. (2009). Study of Barium Bismuth Titanate Prepared by Mechanochemical Synthesis. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 41(3), 329-335.
https://doi.org/10.2298/SOS0903329L

Lazarević ZZ, Bobić J, Romčević N, Paunović N, Stojanović BD. Study of Barium Bismuth Titanate Prepared by Mechanochemical Synthesis. in Science of Sintering. 2009;41(3):329-335.
doi:10.2298/SOS0903329L .

Lazarević, Zorica Z, Bobić, Jelena, Romčević, Nebojša, Paunović, Novica, Stojanović, Biljana D, "Study of Barium Bismuth Titanate Prepared by Mechanochemical Synthesis" in Science of Sintering, 41, no. 3 (2009):329-335,
https://doi.org/10.2298/SOS0903329L . .