TY  - CONF
AU  - Menicanin, Aleksandar
AU  - Luković, Miloljub
AU  - Blaz, Nelu V.
AU  - Movrin, D.
AU  - Živanov, Ljiljana D
PY  - 2019
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1269
AB  - In this paper, we present spiral inductor fabricated by 3D additive manufacturing (AM) with added ferrite disc in the middle of the inductor (center), first approach, and with added ferrite disc beneath the inductor, second approach. The inductor was made with conductive epoxy silver based paste which was injected in a spiral channel fabricated in polylactic acid (PLA) substrate (model) using AM technology. 3D model and obtained results present a connection between passive components production and additive manufacturing. The designed spiral inductor has four full turns, with inner diameter 10 mm and outer diameter 24 mm The total dimension of the component is 27 mm x 27 mm The prototype results show good characteristics and demonstrate an innovative approach to fabricate low-cost, passive devices such as an inductor.
PB  - Institute of Electrical and Electronics Engineers Inc.
C3  - EUROCON 2019 - 18th International Conference on Smart Technologies
T1  - Design and Fabrication of Ferrite Inductor Using 3D Printed Spiral Coil and Ferrite Disc
DO  - 10.1109/EUROCON.2019.8861829
ER  - 

@conference{
author = "Menicanin, Aleksandar and Luković, Miloljub and Blaz, Nelu V. and Movrin, D. and Živanov, Ljiljana D",
year = "2019",
abstract = "In this paper, we present spiral inductor fabricated by 3D additive manufacturing (AM) with added ferrite disc in the middle of the inductor (center), first approach, and with added ferrite disc beneath the inductor, second approach. The inductor was made with conductive epoxy silver based paste which was injected in a spiral channel fabricated in polylactic acid (PLA) substrate (model) using AM technology. 3D model and obtained results present a connection between passive components production and additive manufacturing. The designed spiral inductor has four full turns, with inner diameter 10 mm and outer diameter 24 mm The total dimension of the component is 27 mm x 27 mm The prototype results show good characteristics and demonstrate an innovative approach to fabricate low-cost, passive devices such as an inductor.",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
journal = "EUROCON 2019 - 18th International Conference on Smart Technologies",
title = "Design and Fabrication of Ferrite Inductor Using 3D Printed Spiral Coil and Ferrite Disc",
doi = "10.1109/EUROCON.2019.8861829"
}

Menicanin, A., Luković, M., Blaz, N. V., Movrin, D.,& Živanov, L. D.. (2019). Design and Fabrication of Ferrite Inductor Using 3D Printed Spiral Coil and Ferrite Disc. in EUROCON 2019 - 18th International Conference on Smart Technologies
Institute of Electrical and Electronics Engineers Inc...
https://doi.org/10.1109/EUROCON.2019.8861829

Menicanin A, Luković M, Blaz NV, Movrin D, Živanov LD. Design and Fabrication of Ferrite Inductor Using 3D Printed Spiral Coil and Ferrite Disc. in EUROCON 2019 - 18th International Conference on Smart Technologies. 2019;.
doi:10.1109/EUROCON.2019.8861829 .

Menicanin, Aleksandar, Luković, Miloljub, Blaz, Nelu V., Movrin, D., Živanov, Ljiljana D, "Design and Fabrication of Ferrite Inductor Using 3D Printed Spiral Coil and Ferrite Disc" in EUROCON 2019 - 18th International Conference on Smart Technologies (2019),
https://doi.org/10.1109/EUROCON.2019.8861829 . .

TY  - CONF
AU  - Menicanin, Aleksandar
AU  - Živanov, Ljiljana D
AU  - Movrin, D.
AU  - Blaz, Nelu V.
PY  - 2017
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1072
AB  - This paper presents spiral inductor fabricated by 3D additive manufacturing. The inductor was made with conductive epoxy silver based paste which was injected in spiral channel fabricated in polylactide (PLA) substrate (model) using additive manufacturing technology. The fabricated structure has value of effective inductance around 415 nH, maximum quality factor around 12 and outer dimension diameter 24 mm. The prototype results show good characteristics of 3D additive manufactured spiral inductor and demonstrate an innovative approach to fabricate low-cost, passive devices such as an inductor.
PB  - IEEE Computer Society
C3  - Proceedings of the International Spring Seminar on Electronics Technology
T1  - Spiral Inductor Fabricated by 3D Additive Manufacturing
DO  - 10.1109/ISSE.2017.8001007
ER  - 

@conference{
author = "Menicanin, Aleksandar and Živanov, Ljiljana D and Movrin, D. and Blaz, Nelu V.",
year = "2017",
abstract = "This paper presents spiral inductor fabricated by 3D additive manufacturing. The inductor was made with conductive epoxy silver based paste which was injected in spiral channel fabricated in polylactide (PLA) substrate (model) using additive manufacturing technology. The fabricated structure has value of effective inductance around 415 nH, maximum quality factor around 12 and outer dimension diameter 24 mm. The prototype results show good characteristics of 3D additive manufactured spiral inductor and demonstrate an innovative approach to fabricate low-cost, passive devices such as an inductor.",
publisher = "IEEE Computer Society",
journal = "Proceedings of the International Spring Seminar on Electronics Technology",
title = "Spiral Inductor Fabricated by 3D Additive Manufacturing",
doi = "10.1109/ISSE.2017.8001007"
}

Menicanin, A., Živanov, L. D., Movrin, D.,& Blaz, N. V.. (2017). Spiral Inductor Fabricated by 3D Additive Manufacturing. in Proceedings of the International Spring Seminar on Electronics Technology
IEEE Computer Society..
https://doi.org/10.1109/ISSE.2017.8001007

Menicanin A, Živanov LD, Movrin D, Blaz NV. Spiral Inductor Fabricated by 3D Additive Manufacturing. in Proceedings of the International Spring Seminar on Electronics Technology. 2017;.
doi:10.1109/ISSE.2017.8001007 .

Menicanin, Aleksandar, Živanov, Ljiljana D, Movrin, D., Blaz, Nelu V., "Spiral Inductor Fabricated by 3D Additive Manufacturing" in Proceedings of the International Spring Seminar on Electronics Technology (2017),
https://doi.org/10.1109/ISSE.2017.8001007 . .