TY  - JOUR
AU  - Luković Golić, Danijela
AU  - Ćirković, Jovana
AU  - Šćepanović, Maja
AU  - Srećković, Tatjana
AU  - Longo, Elson
AU  - Varela, JA
AU  - Daneu, Nina
AU  - Stamenković, V.
AU  - Branković, Goran
AU  - Branković, Zorica
PY  - 2014
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/757
AB  - Nano- (30-60 nm) and submicron (100-350 nm) ZnO particles were synthesized using solvothermal method at 200 degrees C from an ethanolic solution of zinc acetate dihydrate, applying different reaction conditions, i.e., pH value of precursor and time of the reaction. The X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), UV-vis diffuse reflectance (DR), Raman spectroscopy, and photoluminescence (PL) spectroscopy have been employed for characterization of synthesized ZnO powders. It was shown that the structural, morphological, and optical properties are largely determined by reaction conditions during solvothermal synthesis. The particle crystallinity improves with the decrease of pH value and/or the increase of time of the reaction. The Raman and PL spectra analyses indicate that the oxygen interstitials are dominant intrinsic defects in solvothermally synthesized ZnO powders. It was observed that concentration of defects in wurtzite ZnO crystal lattices slightly changes with the variation of pH value of the precursor and time of the solvothermal reaction. The correlation between structural ordering and defect structure of particles and corresponding growth processes was discussed.
PB  - Springer, Dordrecht
T2  - Journal of Nanoparticle Research
T1  - The modification of structural and optical properties of nano- and submicron ZnO powders by variation of solvothermal syntheses conditions
IS  - 10
VL  - 16
DO  - 10.1007/s11051-014-2670-1
ER  - 

@article{
author = "Luković Golić, Danijela and Ćirković, Jovana and Šćepanović, Maja and Srećković, Tatjana and Longo, Elson and Varela, JA and Daneu, Nina and Stamenković, V. and Branković, Goran and Branković, Zorica",
year = "2014",
abstract = "Nano- (30-60 nm) and submicron (100-350 nm) ZnO particles were synthesized using solvothermal method at 200 degrees C from an ethanolic solution of zinc acetate dihydrate, applying different reaction conditions, i.e., pH value of precursor and time of the reaction. The X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), UV-vis diffuse reflectance (DR), Raman spectroscopy, and photoluminescence (PL) spectroscopy have been employed for characterization of synthesized ZnO powders. It was shown that the structural, morphological, and optical properties are largely determined by reaction conditions during solvothermal synthesis. The particle crystallinity improves with the decrease of pH value and/or the increase of time of the reaction. The Raman and PL spectra analyses indicate that the oxygen interstitials are dominant intrinsic defects in solvothermally synthesized ZnO powders. It was observed that concentration of defects in wurtzite ZnO crystal lattices slightly changes with the variation of pH value of the precursor and time of the solvothermal reaction. The correlation between structural ordering and defect structure of particles and corresponding growth processes was discussed.",
publisher = "Springer, Dordrecht",
journal = "Journal of Nanoparticle Research",
title = "The modification of structural and optical properties of nano- and submicron ZnO powders by variation of solvothermal syntheses conditions",
number = "10",
volume = "16",
doi = "10.1007/s11051-014-2670-1"
}

Luković Golić, D., Ćirković, J., Šćepanović, M., Srećković, T., Longo, E., Varela, J., Daneu, N., Stamenković, V., Branković, G.,& Branković, Z.. (2014). The modification of structural and optical properties of nano- and submicron ZnO powders by variation of solvothermal syntheses conditions. in Journal of Nanoparticle Research
Springer, Dordrecht., 16(10).
https://doi.org/10.1007/s11051-014-2670-1

Luković Golić D, Ćirković J, Šćepanović M, Srećković T, Longo E, Varela J, Daneu N, Stamenković V, Branković G, Branković Z. The modification of structural and optical properties of nano- and submicron ZnO powders by variation of solvothermal syntheses conditions. in Journal of Nanoparticle Research. 2014;16(10).
doi:10.1007/s11051-014-2670-1 .

Luković Golić, Danijela, Ćirković, Jovana, Šćepanović, Maja, Srećković, Tatjana, Longo, Elson, Varela, JA, Daneu, Nina, Stamenković, V., Branković, Goran, Branković, Zorica, "The modification of structural and optical properties of nano- and submicron ZnO powders by variation of solvothermal syntheses conditions" in Journal of Nanoparticle Research, 16, no. 10 (2014),
https://doi.org/10.1007/s11051-014-2670-1 . .

TY  - JOUR
AU  - Žunić, Milan
AU  - Branković, Goran
AU  - Basoli, Francesco
AU  - Cilense, Mario
AU  - Longo, Elson
AU  - Varela, JA
PY  - 2014
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/813
AB  - There are many of properties of anodes based on proton conductors, like microstructure, conductivity and chemical stability, which should be optimized. In this work we were dealing with the influence of niobium on the chemical stability, microstructural and electrical characteristics of proton conducting NiO-BaCe0.85-xNbxY0.15O3-delta (NiO-BCNYx) anodes. Four anode substrates NiO-BCNYx of different Nb concentration were prepared using the method of evaporation and decomposition of solutions and suspensions (EDSS). Sintered anode substrates were reduced and their microstructural and electrical properties were examined before and after reduction as a function of the amount of niobium. Chemical stability tests showed strong influence of Nb amount on the chemical stability of anodes in the CO2. Microstructural properties of the anode pellets before and after testing in CO2 were investigated using X-ray diffraction analysis. Electrical properties of anode samples were examined by impedance spectroscopy measurements and the conductivity values of reduced anodes were more than 50 S cm (1) at 600 degrees C confirming percolation through Ni particles. Fuel cells were fabricated with aim to examine the functionality of anodes. During the fuel cell test the cell with Ni-BCNY10 anode achieved the highest performance, demonstrating a peak power density of 164 mW cm (2) at 650 degrees C, which confirmed the functionality of Ni-BCNY anodes.
PB  - Elsevier Science Sa, Lausanne
T2  - Journal of Alloys and Compounds
T1  - Stability, characterization and functionality of proton conducting NiO-BaCe0.85-xNbxY0.15O3-delta cermet anodes for IT-SOFC application
EP  - 13
SP  - 7
VL  - 609
DO  - 10.1016/j.jallcom.2014.04.175
ER  - 

@article{
author = "Žunić, Milan and Branković, Goran and Basoli, Francesco and Cilense, Mario and Longo, Elson and Varela, JA",
year = "2014",
abstract = "There are many of properties of anodes based on proton conductors, like microstructure, conductivity and chemical stability, which should be optimized. In this work we were dealing with the influence of niobium on the chemical stability, microstructural and electrical characteristics of proton conducting NiO-BaCe0.85-xNbxY0.15O3-delta (NiO-BCNYx) anodes. Four anode substrates NiO-BCNYx of different Nb concentration were prepared using the method of evaporation and decomposition of solutions and suspensions (EDSS). Sintered anode substrates were reduced and their microstructural and electrical properties were examined before and after reduction as a function of the amount of niobium. Chemical stability tests showed strong influence of Nb amount on the chemical stability of anodes in the CO2. Microstructural properties of the anode pellets before and after testing in CO2 were investigated using X-ray diffraction analysis. Electrical properties of anode samples were examined by impedance spectroscopy measurements and the conductivity values of reduced anodes were more than 50 S cm (1) at 600 degrees C confirming percolation through Ni particles. Fuel cells were fabricated with aim to examine the functionality of anodes. During the fuel cell test the cell with Ni-BCNY10 anode achieved the highest performance, demonstrating a peak power density of 164 mW cm (2) at 650 degrees C, which confirmed the functionality of Ni-BCNY anodes.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Journal of Alloys and Compounds",
title = "Stability, characterization and functionality of proton conducting NiO-BaCe0.85-xNbxY0.15O3-delta cermet anodes for IT-SOFC application",
pages = "13-7",
volume = "609",
doi = "10.1016/j.jallcom.2014.04.175"
}

Žunić, M., Branković, G., Basoli, F., Cilense, M., Longo, E.,& Varela, J.. (2014). Stability, characterization and functionality of proton conducting NiO-BaCe0.85-xNbxY0.15O3-delta cermet anodes for IT-SOFC application. in Journal of Alloys and Compounds
Elsevier Science Sa, Lausanne., 609, 7-13.
https://doi.org/10.1016/j.jallcom.2014.04.175

Žunić M, Branković G, Basoli F, Cilense M, Longo E, Varela J. Stability, characterization and functionality of proton conducting NiO-BaCe0.85-xNbxY0.15O3-delta cermet anodes for IT-SOFC application. in Journal of Alloys and Compounds. 2014;609:7-13.
doi:10.1016/j.jallcom.2014.04.175 .

Žunić, Milan, Branković, Goran, Basoli, Francesco, Cilense, Mario, Longo, Elson, Varela, JA, "Stability, characterization and functionality of proton conducting NiO-BaCe0.85-xNbxY0.15O3-delta cermet anodes for IT-SOFC application" in Journal of Alloys and Compounds, 609 (2014):7-13,
https://doi.org/10.1016/j.jallcom.2014.04.175 . .

TY  - JOUR
AU  - Žunić, Milan
AU  - Branković, Goran
AU  - Foschini, Cesar Renato
AU  - Cilense, Mario
AU  - Longo, Elson
AU  - Varela, JA
PY  - 2013
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/712
AB  - Optimization of the major properties of anodes based on proton conductors, such as microstructure, conductivity and chemical stability, is yet to be achieved. In this study we investigated the influence of indium on the chemical stability, microstructural and electrical characteristics of proton conducting NiO-BaCe0.9 xInxY0.1O3 delta (NiO-BCIYx) anodes. Four compositions of cermet anode substrates NiO-BCIYx were prepared using the method of evaporation and decomposition of solutions and suspensions (EDSS). Sintered anode substrates were reduced and their microstructural and electrical properties were examined before and after reduction as a function of the amount of indium. Anode substrates tested on chemical stability in the CO2 atmosphere showed high stability compared to anode substrates based on commonly used doped barium cerates. Microstructural properties of the anode pellets before and after testing in CO2 were investigated using X-ray diffraction analysis. Impedance spectroscopy measurements were used for evaluation of electrical properties of the anode pellets and the conductivity values of reduced anodes of more than 14 S cm (1) at 600 degrees C confirmed percolations through Ni particles. Under fuel cell operating conditions, the cell with a Ni-BCIY20 anode achieved the highest performance, demonstrating a peak power density 223 mW/cm(2) at 700 degrees C confirming the functionality of Ni-BCIY anodes.
PB  - Elsevier Science Sa, Lausanne
T2  - Journal of Alloys and Compounds
T1  - Influence of the indium concentration on microstructural and electrical properties of proton conducting NiO-BaCe0.9-xInxY0.1O3-delta cermet anodes for IT-SOFC application
EP  - 260
SP  - 254
VL  - 563
DO  - 10.1016/j.jallcom.2013.02.122
ER  - 

@article{
author = "Žunić, Milan and Branković, Goran and Foschini, Cesar Renato and Cilense, Mario and Longo, Elson and Varela, JA",
year = "2013",
abstract = "Optimization of the major properties of anodes based on proton conductors, such as microstructure, conductivity and chemical stability, is yet to be achieved. In this study we investigated the influence of indium on the chemical stability, microstructural and electrical characteristics of proton conducting NiO-BaCe0.9 xInxY0.1O3 delta (NiO-BCIYx) anodes. Four compositions of cermet anode substrates NiO-BCIYx were prepared using the method of evaporation and decomposition of solutions and suspensions (EDSS). Sintered anode substrates were reduced and their microstructural and electrical properties were examined before and after reduction as a function of the amount of indium. Anode substrates tested on chemical stability in the CO2 atmosphere showed high stability compared to anode substrates based on commonly used doped barium cerates. Microstructural properties of the anode pellets before and after testing in CO2 were investigated using X-ray diffraction analysis. Impedance spectroscopy measurements were used for evaluation of electrical properties of the anode pellets and the conductivity values of reduced anodes of more than 14 S cm (1) at 600 degrees C confirmed percolations through Ni particles. Under fuel cell operating conditions, the cell with a Ni-BCIY20 anode achieved the highest performance, demonstrating a peak power density 223 mW/cm(2) at 700 degrees C confirming the functionality of Ni-BCIY anodes.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Journal of Alloys and Compounds",
title = "Influence of the indium concentration on microstructural and electrical properties of proton conducting NiO-BaCe0.9-xInxY0.1O3-delta cermet anodes for IT-SOFC application",
pages = "260-254",
volume = "563",
doi = "10.1016/j.jallcom.2013.02.122"
}

Žunić, M., Branković, G., Foschini, C. R., Cilense, M., Longo, E.,& Varela, J.. (2013). Influence of the indium concentration on microstructural and electrical properties of proton conducting NiO-BaCe0.9-xInxY0.1O3-delta cermet anodes for IT-SOFC application. in Journal of Alloys and Compounds
Elsevier Science Sa, Lausanne., 563, 254-260.
https://doi.org/10.1016/j.jallcom.2013.02.122

Žunić M, Branković G, Foschini CR, Cilense M, Longo E, Varela J. Influence of the indium concentration on microstructural and electrical properties of proton conducting NiO-BaCe0.9-xInxY0.1O3-delta cermet anodes for IT-SOFC application. in Journal of Alloys and Compounds. 2013;563:254-260.
doi:10.1016/j.jallcom.2013.02.122 .

Žunić, Milan, Branković, Goran, Foschini, Cesar Renato, Cilense, Mario, Longo, Elson, Varela, JA, "Influence of the indium concentration on microstructural and electrical properties of proton conducting NiO-BaCe0.9-xInxY0.1O3-delta cermet anodes for IT-SOFC application" in Journal of Alloys and Compounds, 563 (2013):254-260,
https://doi.org/10.1016/j.jallcom.2013.02.122 . .

TY  - JOUR
AU  - Branković, Goran
AU  - Branković, Zorica
AU  - Sequinel, T
AU  - Žunić, Milan
AU  - Vuković, Marina
AU  - Tasić, Nikola
AU  - Marinković, Bojan A
AU  - Cilense, Mario
AU  - Varela, JA
AU  - Longo, Elson
PY  - 2013
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/674
AB  - Processing of the YMn2O5 powder is very challenging, since it decomposes to YMnO3 and Mn3O4 at temperatures close to 1180 degrees C, while samples consolidation commonly demands high temperatures. The main goal of this work is to investigate a possibility to prepare thick films of YMn2O5, since their deposition generally requires significantly lower temperatures. Multiferroic YMn2O5 was synthesized by the hydrothermal method from Y(CH3COO)(3) center dot xH(2)O, Mn(CH3COO)(2) center dot 4H(2)O and KMnO4 precursors. XRD, FE-SEM and TEM analysis showed that the obtained powder was monophasic, with orthorhombic crystal structure and columnar particle shape with mean diameter and length of around 20 and 50 nm, respectively. The obtained powder was suspended in isopropyl alcohol with addition of appropriate binder and deflocculant. This suspension was used for electrophoretic deposition of YMn2O5 thick films under the high-voltage conditions and electric fields ranging from 250 to 2125 V/cm. The films obtained at 1000 V/cm and higher electric fields showed good adhesion, particle packing, homogeneity and very low porosity. It was shown that the deposition in extremely high electric fields (K-C=2125 V/cm) can influence the crystal orientation of the films, resulting in formation of preferentially oriented films.
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - High-voltage electrophoretic deposition of preferentially oriented films from multiferroic YMn2O5 nanopowders
EP  - 2068
IS  - 2
SP  - 2065
VL  - 39
DO  - 10.1016/j.ceramint.2012.08.060
ER  - 

@article{
author = "Branković, Goran and Branković, Zorica and Sequinel, T and Žunić, Milan and Vuković, Marina and Tasić, Nikola and Marinković, Bojan A and Cilense, Mario and Varela, JA and Longo, Elson",
year = "2013",
abstract = "Processing of the YMn2O5 powder is very challenging, since it decomposes to YMnO3 and Mn3O4 at temperatures close to 1180 degrees C, while samples consolidation commonly demands high temperatures. The main goal of this work is to investigate a possibility to prepare thick films of YMn2O5, since their deposition generally requires significantly lower temperatures. Multiferroic YMn2O5 was synthesized by the hydrothermal method from Y(CH3COO)(3) center dot xH(2)O, Mn(CH3COO)(2) center dot 4H(2)O and KMnO4 precursors. XRD, FE-SEM and TEM analysis showed that the obtained powder was monophasic, with orthorhombic crystal structure and columnar particle shape with mean diameter and length of around 20 and 50 nm, respectively. The obtained powder was suspended in isopropyl alcohol with addition of appropriate binder and deflocculant. This suspension was used for electrophoretic deposition of YMn2O5 thick films under the high-voltage conditions and electric fields ranging from 250 to 2125 V/cm. The films obtained at 1000 V/cm and higher electric fields showed good adhesion, particle packing, homogeneity and very low porosity. It was shown that the deposition in extremely high electric fields (K-C=2125 V/cm) can influence the crystal orientation of the films, resulting in formation of preferentially oriented films.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "High-voltage electrophoretic deposition of preferentially oriented films from multiferroic YMn2O5 nanopowders",
pages = "2068-2065",
number = "2",
volume = "39",
doi = "10.1016/j.ceramint.2012.08.060"
}

Branković, G., Branković, Z., Sequinel, T., Žunić, M., Vuković, M., Tasić, N., Marinković, B. A., Cilense, M., Varela, J.,& Longo, E.. (2013). High-voltage electrophoretic deposition of preferentially oriented films from multiferroic YMn2O5 nanopowders. in Ceramics International
Elsevier Sci Ltd, Oxford., 39(2), 2065-2068.
https://doi.org/10.1016/j.ceramint.2012.08.060

Branković G, Branković Z, Sequinel T, Žunić M, Vuković M, Tasić N, Marinković BA, Cilense M, Varela J, Longo E. High-voltage electrophoretic deposition of preferentially oriented films from multiferroic YMn2O5 nanopowders. in Ceramics International. 2013;39(2):2065-2068.
doi:10.1016/j.ceramint.2012.08.060 .

Branković, Goran, Branković, Zorica, Sequinel, T, Žunić, Milan, Vuković, Marina, Tasić, Nikola, Marinković, Bojan A, Cilense, Mario, Varela, JA, Longo, Elson, "High-voltage electrophoretic deposition of preferentially oriented films from multiferroic YMn2O5 nanopowders" in Ceramics International, 39, no. 2 (2013):2065-2068,
https://doi.org/10.1016/j.ceramint.2012.08.060 . .

TY  - JOUR
AU  - Branković, Zorica
AU  - Branković, Goran
AU  - Tucić, Aleksandar
AU  - Radojković, Aleksandar
AU  - Longo, Elson
AU  - Varela, JA
PY  - 2009
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/315
AB  - In this work we optimized conditions for aerosol deposition of homogeneous, nano-grained, smooth Ba0.8Sr0.2TiO3 thin films. Investigation involved optimization of deposition parameters, namely deposition time and temperature for different substrates. Solutions were prepared from titanium isopropoxide, strontium acetate and barium acetate. Films were deposited on Si (1 0 0) or Si covered by platinum (Pt (1 1 1) /Ti/SiO2/Si). Investigation showed that the best films were obtained at substrate temperature of 85 degrees C. After deposition films were slowly heated up to 650 degrees C, annealed for 30 min, and slowly cooled. Grain size of BST films deposited on Si substrate were in the range 40-70 nm, depending on deposition conditions, while the same films deposited on Pt substrates showed mean grain size in the range 35-50 nm. Films deposited under optimal conditions were very homogeneous, crack-free, and smooth with rms roughness lower than 4 nm for both substrates.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Aerosol Deposition of Ba0.8Sr0.2TiO3 Thin Films
EP  - 308
IS  - 3
SP  - 303
VL  - 41
DO  - 10.2298/SOS0903303B
ER  - 

@article{
author = "Branković, Zorica and Branković, Goran and Tucić, Aleksandar and Radojković, Aleksandar and Longo, Elson and Varela, JA",
year = "2009",
abstract = "In this work we optimized conditions for aerosol deposition of homogeneous, nano-grained, smooth Ba0.8Sr0.2TiO3 thin films. Investigation involved optimization of deposition parameters, namely deposition time and temperature for different substrates. Solutions were prepared from titanium isopropoxide, strontium acetate and barium acetate. Films were deposited on Si (1 0 0) or Si covered by platinum (Pt (1 1 1) /Ti/SiO2/Si). Investigation showed that the best films were obtained at substrate temperature of 85 degrees C. After deposition films were slowly heated up to 650 degrees C, annealed for 30 min, and slowly cooled. Grain size of BST films deposited on Si substrate were in the range 40-70 nm, depending on deposition conditions, while the same films deposited on Pt substrates showed mean grain size in the range 35-50 nm. Films deposited under optimal conditions were very homogeneous, crack-free, and smooth with rms roughness lower than 4 nm for both substrates.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Aerosol Deposition of Ba0.8Sr0.2TiO3 Thin Films",
pages = "308-303",
number = "3",
volume = "41",
doi = "10.2298/SOS0903303B"
}

Branković, Z., Branković, G., Tucić, A., Radojković, A., Longo, E.,& Varela, J.. (2009). Aerosol Deposition of Ba0.8Sr0.2TiO3 Thin Films. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 41(3), 303-308.
https://doi.org/10.2298/SOS0903303B

Branković Z, Branković G, Tucić A, Radojković A, Longo E, Varela J. Aerosol Deposition of Ba0.8Sr0.2TiO3 Thin Films. in Science of Sintering. 2009;41(3):303-308.
doi:10.2298/SOS0903303B .

Branković, Zorica, Branković, Goran, Tucić, Aleksandar, Radojković, Aleksandar, Longo, Elson, Varela, JA, "Aerosol Deposition of Ba0.8Sr0.2TiO3 Thin Films" in Science of Sintering, 41, no. 3 (2009):303-308,
https://doi.org/10.2298/SOS0903303B . .

TY  - JOUR
AU  - Branković, Goran
AU  - Branković, Zorica
AU  - Goes, MS
AU  - Paiva-Santos, C. O.
AU  - Cilense, Mario
AU  - Varela, JA
AU  - Longo, Elson
PY  - 2005
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/125
AB  - Ultasonic spray pyrolysis (SP) has been investigated for the production of the barium strontium titanate (BST) powders from the polymeric precursors. The processing parameters, such as flux of aerosol and temperature profile inside the furnace, were optimized to obtain single phase BST. The powders were characterized by the methods of X-ray diffraction analysis, SEM, EDS and TEM. The obtained powders were submicronic, consisting of spherical, polycrystalline particles, with internal nanocrystalline structure. Crystallite size of 10 nut, calculated using Rietveld refinement, is in a good agreement with results of HRTEM.
PB  - Elsevier Science Sa, Lausanne
T2  - Materials Science and Engineering B-Solid State Materials for Advanced Technology
T1  - Barium strontium titanate powders prepared by spray pyrolysis
EP  - 144
IS  - 2
SP  - 140
VL  - 122
DO  - 10.1016/j.mseb.2005.05.016
ER  - 

@article{
author = "Branković, Goran and Branković, Zorica and Goes, MS and Paiva-Santos, C. O. and Cilense, Mario and Varela, JA and Longo, Elson",
year = "2005",
abstract = "Ultasonic spray pyrolysis (SP) has been investigated for the production of the barium strontium titanate (BST) powders from the polymeric precursors. The processing parameters, such as flux of aerosol and temperature profile inside the furnace, were optimized to obtain single phase BST. The powders were characterized by the methods of X-ray diffraction analysis, SEM, EDS and TEM. The obtained powders were submicronic, consisting of spherical, polycrystalline particles, with internal nanocrystalline structure. Crystallite size of 10 nut, calculated using Rietveld refinement, is in a good agreement with results of HRTEM.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Materials Science and Engineering B-Solid State Materials for Advanced Technology",
title = "Barium strontium titanate powders prepared by spray pyrolysis",
pages = "144-140",
number = "2",
volume = "122",
doi = "10.1016/j.mseb.2005.05.016"
}

Branković, G., Branković, Z., Goes, M., Paiva-Santos, C. O., Cilense, M., Varela, J.,& Longo, E.. (2005). Barium strontium titanate powders prepared by spray pyrolysis. in Materials Science and Engineering B-Solid State Materials for Advanced Technology
Elsevier Science Sa, Lausanne., 122(2), 140-144.
https://doi.org/10.1016/j.mseb.2005.05.016

Branković G, Branković Z, Goes M, Paiva-Santos CO, Cilense M, Varela J, Longo E. Barium strontium titanate powders prepared by spray pyrolysis. in Materials Science and Engineering B-Solid State Materials for Advanced Technology. 2005;122(2):140-144.
doi:10.1016/j.mseb.2005.05.016 .

Branković, Goran, Branković, Zorica, Goes, MS, Paiva-Santos, C. O., Cilense, Mario, Varela, JA, Longo, Elson, "Barium strontium titanate powders prepared by spray pyrolysis" in Materials Science and Engineering B-Solid State Materials for Advanced Technology, 122, no. 2 (2005):140-144,
https://doi.org/10.1016/j.mseb.2005.05.016 . .

TY  - JOUR
AU  - Branković, Goran
AU  - Branković, Zorica
AU  - Varela, JA
AU  - Longo, Elson
PY  - 2004
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/102
AB  - Strontium titanate thin films were prepared by spray pyrolysis technique. Deposition parameters, such as solution concentration, time and temperature of deposition, and flow rate of carrier gas were optimized to obtain dense films without cracks. Films with different thicknesses were prepared through the control of deposition time. Prepared thin films were homogeneous, well crystallized, with uniform grain size.
PB  - Elsevier Sci Ltd, Oxford
T2  - Journal of the European Ceramic Society
T1  - Strontium titanate films prepared by spray pyrolysis
EP  - 991
IS  - 6
SP  - 989
VL  - 24
DO  - 10.1016/S0955-2219(03)00459-X
ER  - 

@article{
author = "Branković, Goran and Branković, Zorica and Varela, JA and Longo, Elson",
year = "2004",
abstract = "Strontium titanate thin films were prepared by spray pyrolysis technique. Deposition parameters, such as solution concentration, time and temperature of deposition, and flow rate of carrier gas were optimized to obtain dense films without cracks. Films with different thicknesses were prepared through the control of deposition time. Prepared thin films were homogeneous, well crystallized, with uniform grain size.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Journal of the European Ceramic Society",
title = "Strontium titanate films prepared by spray pyrolysis",
pages = "991-989",
number = "6",
volume = "24",
doi = "10.1016/S0955-2219(03)00459-X"
}

Branković, G., Branković, Z., Varela, J.,& Longo, E.. (2004). Strontium titanate films prepared by spray pyrolysis. in Journal of the European Ceramic Society
Elsevier Sci Ltd, Oxford., 24(6), 989-991.
https://doi.org/10.1016/S0955-2219(03)00459-X

Branković G, Branković Z, Varela J, Longo E. Strontium titanate films prepared by spray pyrolysis. in Journal of the European Ceramic Society. 2004;24(6):989-991.
doi:10.1016/S0955-2219(03)00459-X .

Branković, Goran, Branković, Zorica, Varela, JA, Longo, Elson, "Strontium titanate films prepared by spray pyrolysis" in Journal of the European Ceramic Society, 24, no. 6 (2004):989-991,
https://doi.org/10.1016/S0955-2219(03)00459-X . .

TY  - JOUR
AU  - Branković, Goran
AU  - Branković, Zorica
AU  - Santos, L.P.S.
AU  - Longo, Elson
AU  - Davolos, M.R.
AU  - Varela, JA
PY  - 2003
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/89
AB  - SnO2 ceramics doped with different amounts of Co, Cr or Nb were investigated using visible and infrared spectroscopy at room temperature. Based on the observed d-d transitions the valence states of incorporated dopants were determined. Values of the optical band-gap were calculated in all samples. The infrared spectra of the samples displayed variations in the position, relative intensity and width of the bands, which were attributed to the presence of dopants.
PB  - Trans Tech Publications Ltd
T2  - Materials Science Forum
T1  - Spectroscopic studies of SnO2 doped with Cr, Co or Nb
EP  - 656
IS  - 1
SP  - 651
VL  - 416-418
DO  - 10.4028/www.scientific.net/MSF.416-418.651
ER  - 

@article{
author = "Branković, Goran and Branković, Zorica and Santos, L.P.S. and Longo, Elson and Davolos, M.R. and Varela, JA",
year = "2003",
abstract = "SnO2 ceramics doped with different amounts of Co, Cr or Nb were investigated using visible and infrared spectroscopy at room temperature. Based on the observed d-d transitions the valence states of incorporated dopants were determined. Values of the optical band-gap were calculated in all samples. The infrared spectra of the samples displayed variations in the position, relative intensity and width of the bands, which were attributed to the presence of dopants.",
publisher = "Trans Tech Publications Ltd",
journal = "Materials Science Forum",
title = "Spectroscopic studies of SnO2 doped with Cr, Co or Nb",
pages = "656-651",
number = "1",
volume = "416-418",
doi = "10.4028/www.scientific.net/MSF.416-418.651"
}

Branković, G., Branković, Z., Santos, L.P.S., Longo, E., Davolos, M.R.,& Varela, J.. (2003). Spectroscopic studies of SnO2 doped with Cr, Co or Nb. in Materials Science Forum
Trans Tech Publications Ltd., 416-418(1), 651-656.
https://doi.org/10.4028/www.scientific.net/MSF.416-418.651

Branković G, Branković Z, Santos L, Longo E, Davolos M, Varela J. Spectroscopic studies of SnO2 doped with Cr, Co or Nb. in Materials Science Forum. 2003;416-418(1):651-656.
doi:10.4028/www.scientific.net/MSF.416-418.651 .

Branković, Goran, Branković, Zorica, Santos, L.P.S., Longo, Elson, Davolos, M.R., Varela, JA, "Spectroscopic studies of SnO2 doped with Cr, Co or Nb" in Materials Science Forum, 416-418, no. 1 (2003):651-656,
https://doi.org/10.4028/www.scientific.net/MSF.416-418.651 . .