TY  - CONF
AU  - Savic, Slavica
AU  - Stojanovic, Goran
AU  - Perać, Sanja
AU  - Vasiljevic, Dragana
AU  - Branković, Goran
PY  - 2013
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/2369
AB  - Nickel manganite is very interesting NTC material due to its outstanding
properties and wide field of applications mainly in microelectronics and
optoelectronics and lately in the mobile phone industry. In this work, chemical
synthesis of this material was performed by complex polymerization method (CPM).
The presence of pure nickel manganite phase was confirmed by X-ray analysis. The
obtained fine nanoscaled powders were uniaxially pressed and sintered at different
temperatures: 1000 C -1200C for 2h. Microstructure development during sintering
was observed by scanning electron microscope (SEM). Indentation experiments
were carried out using a three sided pyramidal (Berkovich) diamond tip. Young’s
modulus of elasticity at various indentation depths and hardness of NTC ceramics
were calculated. It was found that the highest hardness and elastic modulus exhibit
the ceramics sintered at highest temperature.
PB  - Institute for Multidisciplinary Research, University of Belgrade Kneza Višeslava 1, 11000 Belgrade, Serbia
C3  - 2nd Conference of the Serbian Ceramic Society
T1  - Nanoindentation of nickel manganite ceramics obtained by complex polimerization method
SP  - 97
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_2369
ER  - 

@conference{
author = "Savic, Slavica and Stojanovic, Goran and Perać, Sanja and Vasiljevic, Dragana and Branković, Goran",
year = "2013",
abstract = "Nickel manganite is very interesting NTC material due to its outstanding
properties and wide field of applications mainly in microelectronics and
optoelectronics and lately in the mobile phone industry. In this work, chemical
synthesis of this material was performed by complex polymerization method (CPM).
The presence of pure nickel manganite phase was confirmed by X-ray analysis. The
obtained fine nanoscaled powders were uniaxially pressed and sintered at different
temperatures: 1000 C -1200C for 2h. Microstructure development during sintering
was observed by scanning electron microscope (SEM). Indentation experiments
were carried out using a three sided pyramidal (Berkovich) diamond tip. Young’s
modulus of elasticity at various indentation depths and hardness of NTC ceramics
were calculated. It was found that the highest hardness and elastic modulus exhibit
the ceramics sintered at highest temperature.",
publisher = "Institute for Multidisciplinary Research, University of Belgrade Kneza Višeslava 1, 11000 Belgrade, Serbia",
journal = "2nd Conference of the Serbian Ceramic Society",
title = "Nanoindentation of nickel manganite ceramics obtained by complex polimerization method",
pages = "97",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_2369"
}

Savic, S., Stojanovic, G., Perać, S., Vasiljevic, D.,& Branković, G.. (2013). Nanoindentation of nickel manganite ceramics obtained by complex polimerization method. in 2nd Conference of the Serbian Ceramic Society
Institute for Multidisciplinary Research, University of Belgrade Kneza Višeslava 1, 11000 Belgrade, Serbia., 97.
https://hdl.handle.net/21.15107/rcub_rimsi_2369

Savic S, Stojanovic G, Perać S, Vasiljevic D, Branković G. Nanoindentation of nickel manganite ceramics obtained by complex polimerization method. in 2nd Conference of the Serbian Ceramic Society. 2013;:97.
https://hdl.handle.net/21.15107/rcub_rimsi_2369 .

Savic, Slavica, Stojanovic, Goran, Perać, Sanja, Vasiljevic, Dragana, Branković, Goran, "Nanoindentation of nickel manganite ceramics obtained by complex polimerization method" in 2nd Conference of the Serbian Ceramic Society (2013):97,
https://hdl.handle.net/21.15107/rcub_rimsi_2369 .